Rear fenderlip rolling

[Drewhelm]

The way I did it was to use a deep socket and a socket wrench. Start by masking the wheel lip with about 3 layers of masking tape. Then start with a socket that squeezes in between the lip and tire about 3 inches from the center of the top of the tire. Using the wrench to turn the socket in the direction you want it to travel. Simply ratchet it across. Replace the deep socket with the next size bigger and repeat. You can work the same socket back and forth across the top of the tire by switching the ratchet switch. You will notice the lip rolling up along the inner edge. Just take your time and continue to go up in size on the socket until you've reached the desired clearance.