Results 1 to 4 of 4
Thread: Rear spring install on a 1st Gen
-
02-05-2007 #1
Registered User
- Join Date
- Sep 2006
- Location
- Windham, NH
- Posts
- 965
Rear spring install on a 1st Gen
I am putting new rear DSE 3" drop springs in and need to replace the little clip do-dads on the front of the spring perch.
Anyone know where I get new ones?
Thanks,
Phil
-
02-05-2007 #2
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
search tab is your friend...https://www.pro-touring.com/forum/sh...ad.php?t=26782
MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
02-05-2007 #3
Registered User
- Join Date
- May 2005
- Location
- Fontana, CA
- Posts
- 4,960
Dude, go to a local hardware store and they are cheaper than from the resto places. I bought 6 new ones and they are much better than the old ones.
Also try Mcmaster-CarrNick R.
69 Camaro - 383, 700R4, 12 bolt 3.55, Hotchkis, Bilstein, Global West, Morris Classic
08 HHR SS - Still Stock for now
Do you still believe in all the things that you stood by before? Are you out there on the front lines, or at home keeping score?
Do you care to be the layer of the bricks that seal your fate? Would you rather be the architect of what we might create?
02-05-2007 #4
Registered User
- Join Date
- Sep 2006
- Location
- Windham, NH
- Posts
- 965
Thanks guys, very helpful.
As always, I did do a search, but when you don't have the name of the part, the results suck. ;)
I have a specialty fastener place located nearby. Now that I know what they are, I will try them 1st.
Thanks again,
Phil
Reply With Quote
