Results 1 to 8 of 8
Thread: Notched control arm
-
02-03-2007 #1
Registered User
- Join Date
- Feb 2007
- Posts
- 38
Notched control arm
Hello all:
Take a look at this pic of the lower control arm off a 1971 Firebird. It appears to have been notched, possibly to make room for a header tube???
Will this degrade the structure of the arm enough that I should replace it?
Thanks, Rick
-
02-03-2007 #2
Registered User
- Join Date
- Aug 2004
- Posts
- 830
seems alittle on the shady side to me. not only has it had over 30 years of hard use but that notch looks to be on a stressed part of the arm. I'd raplace it.
or at least do a quality repair
-
02-03-2007 #3
Registered User
- Join Date
- Jan 2005
- Location
- RHODE ISLAND
- Posts
- 113
will a 68 work with that if so I have one you can have.
02-03-2007 #4
Full Blown G-Machiner
- Join Date
- Mar 2003
- Location
- Kirkland, WA
- Posts
- 884
I think the control arms changed in '70. I wouldn't reuse a piece like that on my car.
02-04-2007 #5
Registered User
- Join Date
- Aug 2005
- Location
- Hamilton, NJ
- Posts
- 4,317
It almost looks broken. I'd toss it.
Scott from NJ.
Vent Windows Forever! ...
Feather-light suspension, Konis just couldn't hold
I'm so glad I took a look inside your showroom doors
02-05-2007 #6
Registered User
- Join Date
- Jun 2005
- Location
- Louisiana
- Posts
- 137
Ditto....that cut has weakened that arm substantially.
02-05-2007 #7
Registered User
- Join Date
- Feb 2007
- Posts
- 38
Thanks for the tips folks. I have a set from an '81 T/A that I will use.
Rick
02-05-2007 #8
Registered User
- Join Date
- May 2005
- Location
- Fontana, CA
- Posts
- 4,960
Toss it.
Nick R.
69 Camaro - 383, 700R4, 12 bolt 3.55, Hotchkis, Bilstein, Global West, Morris Classic
08 HHR SS - Still Stock for now
Do you still believe in all the things that you stood by before? Are you out there on the front lines, or at home keeping score?
Do you care to be the layer of the bricks that seal your fate? Would you rather be the architect of what we might create?
Reply With Quote
