69 Rally Sport - Front Inner Fender-well

[BA.]

Just curious as to any thoughts or inside scoop people have on this topic.

Ricks 1st Gen has a separate Inner Fender Well for the RS vs a standard Camaro.

Supposedly OER and Goodmark only carry a single part number for the RS and Standard.

I thought there were special mounting spots for the RS, like for the tank, and a hole in the extension piece for the arm of the canisters?


What do people with RS's do if they buy the OER or Goodmark part?

[Rick D]

They cut the hole that they need. All of the bosses are there to cut your holes, well they should be there, I have seen some that where missing. If you have old ones than just make a templet from the old holes. If you need some pictures let me know I have a NOS pair I could show you.

[BA.]

Thank you Rick, that is just what I needed to know!

[JSR69]

They cut the hole that they need. All of the bosses are there to cut your holes, well they should be there, I have seen some that where missing. If you have old ones than just make a templet from the old holes. If you need some pictures let me know I have a NOS pair I could show you.

Rick

I bought a pair of OER that don't have any bosses or markings. When I bought my car, the front end was already disassembled and the inner panels were disposed of due to rust. Therefore, I don't have any templates to go off of. Could I get you to send me some pictures? Also, could you tell me what size the hole is for the bell crank?

Thanks very much.

[Rick D]

Sure I will get some picture on Monday my inner's are at the shop. PM your e mail address and I will send them to you.

[bigtyme1]

Try these Templates. worked great for mine.

http://www.carsbyjim.com/storage/RSs...lltemplate.JPG

http://www.carsbyjim.com/storage/RSs...lltemplate.JPG

http://www.carsbyjim.com/storage/RSs...lltemplate.JPG

http://www.carsbyjim.com/storage/RSs...RStemplate.JPG

[JSR69]

Sure I will get some picture on Monday my inner's are at the shop. PM your e mail address and I will send them to you.

Rick

PM Sent with email address.

Bigtyme

Thank for the templates that will help also.