Wheel adapters came off Ebay; "EZ Accessories" they were called. No vibrations. They are billiet Al but I painted them black to coordinate with the grey centered rims and to remain hidden.

Wheels; fronts are 17 x 9, rears 17 x 10.5. Stock Ford size and offsets. Got them on Ebay from OE Wheels. No problems dealing with them, very happy. Balanced well, did not require allot of weight. My dad spent many hours figuring out all the wheel / tire combinations and then we set about looking for something I could afford and that I liked. He said that is backwards in some ways but it worked out well.

No real rubbing. Leading edge of rear inner wheel wells and seat belt budge slightly hammered; cannot even tell. In the front, does not even hit the 1.25" sway bar at full lock; has approx. 3/4" to spare. When I tuck the rears in more, the seat belt bulge will have to move again. I am targetting to get to within 3/8 - 1/2" of the front section of the leaf spring.....the next closest item (approx. 3/4" now). PS: Dad mini-tubbed his 69 Bird. While I thought about it for mine, I am not ready for that on many fronts ($$). Plus, he insists I do not cut up the car.

Hotchkis.....handles great. Front height perfect after settling. Rears are high, but this was expected after reading most folk's accounts. Going to drop them 1.0" to wrap-the-tire with the wheel well better. Have not rolled the lips, may if I really want to get it much lower. Worried about driving over speed bumps and having passengers though, if I chase that stance. Presently, it already bottoms out on the exhaust if I am not slow and cautious (i.e. take them at an angle). Exhaust is tight to the floor. School parking lot concerns mostly. Considering a Pypes crossflow muffler to give me more under-carriage clearance.

Thanks,

Matt