Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 10 of 10
    1. #1
      Join Date
      Jun 2005
      Posts
      436

      T56 question about clutch stuff

      has anyone used a stock hydraulic clutch master cylinder assembly? How did it work and how did you install it? what is the difference between a stock one and say, the ATS version?



    2. #2
      Join Date
      Aug 2004
      Location
      CHICAGO SUBURBS
      Posts
      761
      The ATS clutch master has been made shorter and has an adapter bracket to match the angle of the firewall on Camaro and Nova. I used a stock master on an '80s G body. Needed the mobified one for a Camaro. FRANK

    3. #3
      Join Date
      Jul 2005
      Location
      Eastern Virginia
      Posts
      3,965
      Country Flag: United States
      I used the stock setup on my G body as well. I made a bracket to fit between the brake booster & firewall to mount the master cylinder to that would give it the proper angle to attach to the pedal.
      Scot
      86 Monte SS


    4. #4
      Join Date
      Jun 2005
      Posts
      436
      Thanks guys... i should have been more specific... i have a 1968 camaro... going from auto to manual.

    5. #5
      Join Date
      Jul 2005
      Location
      Eastern Virginia
      Posts
      3,965
      Country Flag: United States
      I got the idea for the plate in a car magazine years ago. They had one designed for a 67-69 Camaro to do the same thing. I believe it was to use the factory hydraulic setup. I believe that the bracket is the same as the one shown on ATS's website: http://www.t56kit.com/downloads/files/2.pdf
      Scot
      86 Monte SS


    6. #6
      Join Date
      Jul 2005
      Location
      Eastern Virginia
      Posts
      3,965
      Country Flag: United States
      Their clutch bracket sells for $75. I was selling mine for $50. Still, I think, it is a good deal.
      Scot
      86 Monte SS


    7. #7
      Join Date
      Jun 2005
      Posts
      436
      are you still selling yours? i am interested.

    8. #8
      Join Date
      Jul 2005
      Location
      Eastern Virginia
      Posts
      3,965
      Country Flag: United States
      I may have one left , but I believe the center hole for the brake apply rod is in a different location than what you have on the Camaro. Compare the picture of mine, compared to the one for the Camaro on ATS's website.

      https://secure7.nexternal.com/ats/im...lbrkt_Main.jpg
      Scot
      86 Monte SS


    9. #9
      Join Date
      Jun 2005
      Posts
      436
      You are right they are different. Thanks anyways. I think i'll just buy the modified version from ATS and the plate as well.

    10. #10
      Join Date
      Dec 2006
      Location
      NE OHIO
      Posts
      100
      Hey guys..... i saved this from a old issue of Camaro Performers ...





      I found these trick remote resevoirs and started selling them to Streetrodders. I figured they might be a cool addition those smoothed firewalls out there in the PT cars too....




    Advertise on Pro-Touring.com