Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 12 of 12
    1. #1
      Join Date
      Apr 2006
      Posts
      52

      Mech. Vs. Hyd. Clutch

      Can't decide on which way to go....mech. or hydraulic clutch. Anyone have some insite one pros & cons???



    2. #2
      Join Date
      Jun 2005
      Location
      Greenwood, SC
      Posts
      2,314
      don't have to pull the tranny for most clutch issues with mechanical.

      What tranny are you planning on running? that might factor in too.

    3. #3
      Join Date
      Aug 2004
      Location
      Harriman, Tennessee
      Posts
      1,310
      Country Flag: United States
      I went with mechanical, so I didn't have to worry about piston sizes and the like. To make it smooth and easy to use, I went with heim (sp?) joints. Makes the cluthc feel great... even better if I ever get to drive the damned thing!

      Shiny Side Up!
      Bill
      '72 442 "Inamorata"
      www.FQuick.com/ProTouring442
      "You can never go home again, Oatman...


      But I guess you can shop there."

    4. #4
      Join Date
      Apr 2006
      Posts
      617
      Country Flag: United States
      I have a T56 in my car. This is the first hydraulic clutch I ever had.I think it is a lot nicer than the mechanical ones I had in the past.
      One nice thing about hydraulic is it frees up a lot of room for the headers. Just my .02$ Randy
      Please see my PT Garage for more info on ProBell Camaro. 67 style,99 comfort, options and drive-ability with NASCAR Late Model suspension front and rear.https://www.pro-touring.com/forum/vb...?do=view&g=106
      ------------------------------------------------------------------------------------------------
      Car Domain PG
      http://www.cardomain.com/ride/2565383

    5. #5
      Join Date
      Aug 2006
      Location
      Hampton Roads, VA
      Posts
      678
      Country Flag: United States
      Good point from ProBell about header clearance issues. However if you are running standard size primaries, and not custom-fabricated headers you should have no prob with a mechanical setup. I like my mechanical, as some have mentioned before it actually feels a slight bit more responsive to me than hydraulic, costs less and is simpler and easy to work on. Also don't believe the old-timers who tell you you will have to go to the gym and build up your left leg because pedal pressure will be so hard with a mech, I greased up all the joints and my clutch is smooth and easy, my wife can operate it with no problem.
      From what I hear you may be able to shift slightly quicker with a hydraulic, but I am not so fast that my mechanical setup can't keep up, so that doesn't matter to me.

      Paul
      1980 Pontiac Trans Am, Chevy Big Block 468, TKO 600 Trans, Hotchkis TVS, Bilsteins, Eaton/Motive 3:73's, 18" Coddington Junkyard Dogs, Nitto NT555 rubber, Autometers http://www.fquick.com/Bandit
      http://www.cardomain.com/ride/2458763

    6. #6
      Join Date
      Apr 2006
      Posts
      52
      Thanks for the input!!

      (It'll be a tremec tko600)

      Now if I can figure out why the dam thing sits soooo high, I'll be in buisness.

      Josh-

    7. #7
      Join Date
      Nov 2006
      Posts
      103
      They say that hydraulic will ease the pedal effort although, personally, I don't think you'll notice a difference unless you have a ton of power and are running a "racing" clutch. For me, mechincal is so much simpler and less aggrivating(sp?).
      Richard
      Tech Support
      Keisler Engineering

    8. #8
      Join Date
      Oct 2004
      Location
      Niceville, Florida 32578
      Posts
      170
      Country Flag: United States
      I've always preferred the feel of a mechanical clutch linkage. I stalled out several times when I bought my first vehicle equipped with a hydraulic throwout bearing (V8 Dakota), just could not feel when the clutch was grabbing.

      I added heim joints to my mechanical linkage and reduced the pressure required to fully depress the pedal from 78 to 66 pounds. That's on an 11" CF DF clutch and TKO-600 trans. Feels as smooth as the pedal in my son's 06 GTO, which also takes about 66 lbs to depress.
      All that is necessary for evil to succeed is that good men do nothing.

      Edmund Burke

    9. #9
      Join Date
      Oct 2004
      Posts
      3
      Can someone please post pictures of the mech clutch linkage with Heim joints installed?

    10. #10
      Join Date
      Nov 2005
      Posts
      38
      I used these on my camaro. Great item, eliminated sloppy operation of the original . http://www.speeddirect.com/index.aspx?nodeID=34

    11. #11
      Join Date
      Jun 2001
      Location
      Newbury Park, CA
      Posts
      5,839
      Country Flag: United States
      Check out David Pozzi's site. He shows how to make a home-grown version. A deep tap is not necessary.
      VaporWorx. We Give You Gas http://www.vaporworx.com

    12. #12
      Join Date
      Aug 2004
      Location
      Encinitas, CA
      Posts
      219
      Mechanical - easier, less expensive, and dependable.
      The main pro for hydraulic is if you have header clearance issues.
      Jeff Mortenson




    Advertise on Pro-Touring.com