Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    View Poll Results: Which fender strut design do you prefer

    Voters
    119. You may not vote on this poll
    • Design #1

      41 34.45%
    • Design #2

      68 57.14%
    • Design #3

      10 8.40%
    Results 1 to 20 of 45

    Hybrid View

    1. #1
      Join Date
      Jan 2003
      Location
      Arizona
      Posts
      5,394
      Country Flag: United States
      Yup. That's Jeff's old car now owned by Jimmy Mulvey. It now has a full DSE front clip upgrade and a sweet 383. Soon to get a Quadra-Link. Lucky me, I get to stare at it every day and drive it every once and a while (just to help keep the juices flowing).

      It's also an official Twist R&D car. So it will be first to receive all of the cool 69 Camaro parts that we are working on.

      Rocket,
      We messed around with a few other designs. If you have a special fender strut in mind, we can build 'em for you. Shouldn't be too difficult now that the basic program is set up. Figure on no more than $250/pr. We also have a radical design in mind that is a complete departure from the basic "long and narrow" strut profile, but they would run around $500/pr or more--World's most expensive fender struts!! Aluminum has gone up 40%.

      ________________
      Steve Chryssos


    2. #2
      Join Date
      Apr 2006
      Location
      California Bay Area
      Posts
      235
      i picked #uno but dos is also very nice
      65 Impala
      01 Z06

    3. #3
      Join Date
      Sep 2004
      Location
      Metamora, Illinois
      Posts
      1,620
      Quote Originally Posted by streetfytr68
      Yup. That's Jeff's old car now owned by Jimmy Mulvey. It now has a full DSE front clip upgrade and a sweet 383. Soon to get a Quadra-Link. Lucky me, I get to stare at it every day and drive it every once and a while (just to help keep the juices flowing).

      It's also an official Twist R&D car. So it will be first to receive all of the cool 69 Camaro parts that we are working on.

      Rocket,
      We messed around with a few other designs. If you have a special fender strut in mind, we can build 'em for you. Shouldn't be too difficult now that the basic program is set up. Figure on no more than $250/pr. We also have a radical design in mind that is a complete departure from the basic "long and narrow" strut profile, but they would run around $500/pr or more--World's most expensive fender struts!! Aluminum has gone up 40%.
      I like the design of #1 & #2, but instead of the brace being attached on top of the radiator support I want to secure it to the vertical portion of the support and fill in the mounting hole on top. This would hide the bolt securing the brace to the support and provide a cleaner look.

    4. #4
      Join Date
      Jan 2003
      Location
      Arizona
      Posts
      5,394
      Country Flag: United States
      Quote Originally Posted by rocketrod
      ......instead of the brace being attached on top of the radiator support I want to secure it to the vertical portion of the support and fill in the mounting hole on top......
      We can do that, but it's a totally different design that starts out with a much bigger slug. It's a one off part so it will be pricey. If you are interested, visit this webpage and give us a call.

      http://www.twistmachine.com/customshop/
      ________________
      Steve Chryssos

    5. #5
      Join Date
      Dec 2005
      Location
      South Dakota
      Posts
      205
      Country Flag: United States
      I voted #2 but I like #4 too. (the one on the flyer that I picked up at SEMA in the booth) Instead of the larger indentation on the sides they had 4 or 5 smaller grooves machined in. I would also like it without the steps.
      Steve Lenning
      69 Camaro LS7/T56
      69 Camaro SS396/350hp
      70 Camaro-just getting started
      64 Chevelle - waiting it's turn
      2010 Camaro 2SS/RS 6spd




    Advertise on Pro-Touring.com