Results 1 to 5 of 5
Thread: Spacer for Disc spindle?
-
10-09-2006 #1
Registered User
- Join Date
- Feb 2005
- Location
- Northwest
- Posts
- 126
Spacer for Disc spindle?
I am ready to trash my machined drum spindles for my old disc spindles and a spacer I don't think they are flat.
Does anyone have a line on where I can find these.
Someone was making them at one point, I already have the brackets from rich. Did a search and found nothing substantial.
Thanks, SS.
-
10-11-2006 #2
Registered User
- Join Date
- Feb 2006
- Location
- Elk Ridge, Utah
- Posts
- 602
Bump
Anyone?????69 Camaro
W/D sub, Wilwood 13" brakes Bozeforged wheels 18X10 & 18X12,
Lateral dynamics 3 link ( custom setup ) Dana 60
lsX Twin Turbo, soon to come
Viper T56 in place (Yay)
Bought a running driving car so I can enjoy it before Im dead
LD 3 Link Installed into ^^^^^ (Yay)
10-11-2006 #3
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
its just a 9/16" spacer. You can have one made for very cheap.
MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
10-12-2006 #4
Starting The Transformation
- Join Date
- Sep 2004
- Posts
- 135
You might consider using one of:
A drum hub;
A '69 cast one piece hub with the rotor turned off; or a
'67/'68 two piece rotor hub less bolt-on rotor.
And just use washers to shim out where you want it.
pdq67
10-16-2006 #5
Starting The Transformation
- Join Date
- Apr 2005
- Location
- Poulan GA
- Posts
- 143
So all I'll need for the c5 conversion on my 68 camaro with stock discs spindles is a 9/16" spacer. Sounds kinda large. guess it'll be cheaper than trying to find a set of drums. Unless anyone wants to do some horse trading.
Reply With Quote
