Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 21 of 26 FirstFirst ... 11 16 17 18 19 20 21 22 23 24 25 26 LastLast
    Results 401 to 420 of 585

    Hybrid View

    1. #1
      Join Date
      Nov 2002
      Location
      state of confusion
      Posts
      1,499
      Country Flag: United States
      Very nice, especially now that I know that all those GPS things are performance-related. I used to do a little TSD rallying, and these ORR classes sound somewhat similar in that you're trying to "zero" a 90 mile long leg at a high average speed. T'ain't easy.



      No matter what the motorsport activity, it's fun being under-estimated.


      Norm
      '08 GT coupe, 5M, suspension unstockish (the occasional track toy)
      '19 WRX, Turbo-H4/6M (the family sedan . . . seriously)
      Gone but not forgotten dep't:
      '01 Maxima 20AE 5M, '10 LGT 6M, '95 626, V6/5M; '79 Malibu, V8/4M-5M; '87 Maxima, V6/5M; '72 Pinto, I4/4M; '64 Dodge V8/3A


    2. #2
      Join Date
      Jun 2011
      Location
      St. George, Utah
      Posts
      1,629
      Country Flag: United States
      So what's your final drive ratio?

      I'm not anywhere near what you've got into your car but I'll be putting a 9" into my wagon and I have a 2.75 center and a 3.50 center. I'll be running a +/- 400 flywheel hp LS motor and a th350. The car isn't built yet so I'm just wondering if it'll make it in the 130 or 140 MPH club at Bonneville...
      -Ben, Your friendly neighborhood Rendering dude

      SRD on Facebook

      79 Cutlass wagon build


    3. #3
      Join Date
      Sep 2011
      Location
      Southlake, TX
      Posts
      96
      Country Flag: United States
      Quote Originally Posted by SRD art View Post
      So what's your final drive ratio?

      I'm not anywhere near what you've got into your car but I'll be putting a 9" into my wagon and I have a 2.75 center and a 3.50 center. I'll be running a +/- 400 flywheel hp LS motor and a th350. The car isn't built yet so I'm just wondering if it'll make it in the 130 or 140 MPH club at Bonneville...
      We currently run a 3.25 with a T-56 and run most races in .75:1 5th. We have run 3.0:1, 2.75:1 and 2.5:1 to try out different gear ratios with our Richmond ROD (1:1 5th, weak nut, made of glass .82 6th).

      2.75:1 is a good ratio for ORR. If you want to Wind the LS out, you can get a 3.0 or 3.25, but I personally would not go with a 3.50:1.

      2.50:1 is my personal favorite gear for a 1:1 final drive ratio (or for cars with a non close ratio or weak OD). Its very sluggish out of the hole and hard on clutches, but is Excellent above 130 mph. In the 140 mph class we run at big bend, the ability to accellerate from 130 to 160 is more important than accellerating from 0 - 60, since we only have to do that twice per race and have to accellerate above 140 coming out of almost every corner (I think there is about 100 of them in the race).
      Chris Bischof
      My G-body homepage
      '86 Pontiac 2+2 ORR car, '86 Regal T-type, '86 GN, '89 TTA, '13 GTHIG 5.0
      SORC 115 mph Class Winner '07, '10, '11, '13, '15

    4. #4
      Join Date
      Sep 2011
      Location
      Lawler, IA
      Posts
      569
      Country Flag: United States
      Schwartz Performance is preparing to build a G-Machine chassis for your g-body. I delivered my 84 Monte SS on Sept. 2 for chassis #1. Check there website and facebook page for details. www.schwartzperformance.com.
      Some details: 13" rotors, 6 piston calipers, ridetech coil over adjustable shocks, splined sway bars, triangulated 4 lik rear susp, 9" rear 31 spline axles.

    5. #5
      Join Date
      Apr 2005
      Location
      Cartersville, GA
      Posts
      1,298
      Country Flag: United States
      Quote Originally Posted by howehot View Post
      Schwartz Performance is preparing to build a G-Machine chassis for your g-body. I delivered my 84 Monte SS on Sept. 2 for chassis #1. Check there website and facebook page for details. www.schwartzperformance.com.
      Some details: 13" rotors, 6 piston calipers, ridetech coil over adjustable shocks, splined sway bars, triangulated 4 lik rear susp, 9" rear 31 spline axles.
      I'm glad to see they are getting started on it! I heard about this chassis several months ago, and I'm looking forward to seeing some in-progress pics!
      Joe Hinds

    6. #6
      Join Date
      Nov 2002
      Location
      state of confusion
      Posts
      1,499
      Country Flag: United States
      Welcome aboard.

      The Schwartz 4-link is interesting in that it is really an upside-down Satchell link. I think that means you're getting a better rear roll center height than OE and better lower arm geometry for a high-HP/torque car than an original Satchell.

      Will there be a build thread in "Project Updates"?


      Norm
      '08 GT coupe, 5M, suspension unstockish (the occasional track toy)
      '19 WRX, Turbo-H4/6M (the family sedan . . . seriously)
      Gone but not forgotten dep't:
      '01 Maxima 20AE 5M, '10 LGT 6M, '95 626, V6/5M; '79 Malibu, V8/4M-5M; '87 Maxima, V6/5M; '72 Pinto, I4/4M; '64 Dodge V8/3A

    7. #7
      Join Date
      Sep 2011
      Location
      Lawler, IA
      Posts
      569
      Country Flag: United States
      I believe they will use facebook and their website. Hopefully the build will start in a few weeks. They have a few projects to finish and parts to order for the Monte.

    8. #8
      Join Date
      Aug 2011
      Location
      Sevierville, TN
      Posts
      524
      Country Flag: United States
      Quote Originally Posted by UNGN View Post
      Our 2+2 has worked out pretty good for us. There is no better feeling than having a bigmouthed Corvette guy in a C6 make excuses why he was 10 mph slower than a 25 year old, used car lot POS that you built yourself (with a little help from your friends).

      The Aero speaks for itself. Here's me waving at the Radar guy at nearly 170 mph, on a truck worn 2 lane road with a 10 mph cross wind.





      For Comparison, this is what a C5 Z06 looks like at about the same speed through the same trap in 2008:



      Check out the distances between the top of the tire and the fender lip.
      How does the hood stay that flat at those speeds? The hood on my old elky looked more like that Vette's hood at speeds above 90.

      This is really cool to see a rare car getting beat on. I've been around cars all my life and I've only seen about 4 2+2 GP's. All of them were either pampered or in a museum.
      Matt Kenner

      68 C10 stepside

      If you can leave two black stripes from the exit of one corner to the braking zone of the next, you have enough horsepower. - Mark Donohue

    9. #9
      Join Date
      Nov 2006
      Location
      Washington, MO
      Posts
      2,363
      And no hood pins either? Yikes!

    10. #10
      Join Date
      Aug 2004
      Location
      Dunwoody, GA
      Posts
      4,983
      Country Flag: United States
      I believe the extractors on his hood are functional thereby relieving the underhood pressures that were forcing the hood up on your elky.
      Trey

      "The early bird may get the worm, but the second mouse gets the cheese."
      ~ Jon Hammond

      1979 WS6 Trans Am stock LT1/T56 drive train out of my Formula. BMW M-parallel rims. C5/C6 brakes

      build thread https://www.pro-touring.com/showthre...ghlight=begins

    11. #11
      Join Date
      Nov 2006
      Location
      Washington, MO
      Posts
      2,363
      Quote Originally Posted by WS6 View Post
      I believe the extractors on his hood are functional thereby relieving the underhood pressures that were forcing the hood up on your elky.
      Which is why I'm going to run vents like these... in the other post he says how much heat escapes out of them too....

    12. #12
      Join Date
      Sep 2011
      Location
      Southlake, TX
      Posts
      96
      Country Flag: United States
      We run hood vents from an '89 GP that I opened up with a Dremel tool for more airflow. Otherwise its the stock hood.

      The big aero inprovements in front we made were covering the top grill openings with block off plates and the deep core support airdam made from Conveyor belt rubber. We also had to reinforce the factory air dam because it would fold under the car at speed.

      I was going to make headlight covers and a large front airdam at the front bumper, but it never needed them.


      In back, we had to put small steel "L" brackets to hold the bubble window down, because the back edge would lift up 1" off the seal at speed. This might be a problem on an SS Aerocoupe if you try to run it above 150 or so.
      Chris Bischof
      My G-body homepage
      '86 Pontiac 2+2 ORR car, '86 Regal T-type, '86 GN, '89 TTA, '13 GTHIG 5.0
      SORC 115 mph Class Winner '07, '10, '11, '13, '15

    13. #13
      Join Date
      Aug 2011
      Location
      Sevierville, TN
      Posts
      524
      Country Flag: United States
      GGRRRRRRRRR!!!!!!!!!!
      Matt Kenner

      68 C10 stepside

      If you can leave two black stripes from the exit of one corner to the braking zone of the next, you have enough horsepower. - Mark Donohue

    14. #14
      Join Date
      Apr 2006
      Location
      MD
      Posts
      232
      Country Flag: United States
      Damn that GN is sexy

    15. #15
      Join Date
      Nov 2007
      Location
      Oro Valley, AZ
      Posts
      80
      Anybody else notice the passenger window? Gotta love air pressure
      -Darren-
      '78, '81 Malibu, '92 Sierra

      Quote Originally Posted by joemac View Post
      ...not only am I talking to myself as I'm going down the road I'm starting to answer myself and laugh at my own jokes-out loud...

    16. #16
      Join Date
      Jun 2011
      Location
      St. George, Utah
      Posts
      1,629
      Country Flag: United States
      Nice GNs guys! 275s up front, woohoo! Are they 18's or 19s? Check my build thread, I have 255s on 9.5s up front, but I couldn't get them tucked like yours because of the tie rod ends. What's your secret? The AFX spindles?
      -Ben, Your friendly neighborhood Rendering dude

      SRD on Facebook

      79 Cutlass wagon build


    17. #17
      Join Date
      Mar 2005
      Location
      St George Utah
      Posts
      1,243
      Country Flag: United States
      part of the equasion is the AFX spindles but the only modification i make to the front was to move the factory brake line mounting bracket the other KEY is the shape of the control arms, we make the control arms clear the hi back space wheels, my car has 18 x 9 with 6" Back space on the front the 275 do touch the frame when the wheel is cranked but what ever
      Blake Foster
      www.speedtechperformance.com
      435-628-4300
      St. George Utah.
      it's always sunny here.

    18. #18
      Join Date
      Mar 2010
      Location
      Okinawa, Japan
      Posts
      305
      Country Flag: United States
      Here's mine:



      Build thread is in my signature.
      81 Regal, impersonating a Grand National with a 488 Olds
      Build thread: https://www.pro-touring.com/showthre...ith-a-488-Olds

    19. #19
      Join Date
      Nov 2011
      Posts
      8
      Country Flag: United States
      Just signed up. '87 Regal T-package. (came factory with T-type wheels, interior, suspension, and steering box)
      Still relatively unmodified.

    20. #20
      Join Date
      Oct 2006
      Location
      So Cal San Dimas Ca.
      Posts
      352

    Page 21 of 26 FirstFirst ... 11 16 17 18 19 20 21 22 23 24 25 26 LastLast



    Advertise on Pro-Touring.com