Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 17 of 17

    Hybrid View

    1. #1
      Join Date
      Mar 2004
      Location
      Mid-Michigan
      Posts
      2,764
      Country Flag: United States
      Stop.... Take a breathe... Go outside and look at your car.

      Now, tell us EXACTLY what you are building... A race car or a street car? If you are building a RACE car fine, all of those sites, even the Landrum site, are geared toward ALLOUT circle track race cars. There is no consideration taken for turning right, hitting speed bumps, potholes or steep driveways...
      You are making this much to difficult, as I did when I was developing Bad Ast... It is really a simple thing to make your car handle well on the street. Poly bushings, good shocks and a matched sway bar. That's all you need. The race car tech is just that, race car tech, and it does NOT apply or work well on a street car... Sperical pivots, sliders, angled springs and all that rot will not live on the street. Mud, water, grit and extreme conditions will eat them up and you will be putting stock stuff back on inside of a year.... quaranteed.
      You have to come to grips with the end use of the car and you said yourself it is a street car. Build a street suspension and you will save yourself a lot of time, money and lost effort...
      I am not trying to flame you here. I just want to think about what you are actually building.
      Mark

      Mark:
      "Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
      This my Bad Ast thread...
      https://www.pro-touring.com/showthre...roject-Faze-II
      This is my Fotki album...
      http://astroracer.fotki.com/


    2. #2
      Join Date
      Dec 2005
      Posts
      62
      Quote Originally Posted by astroracer
      Stop.... Take a breathe... Go outside and look at your car.

      Now, tell us EXACTLY what you are building... A race car or a street car? If you are building a RACE car fine, all of those sites, even the Landrum site, are geared toward ALLOUT circle track race cars. There is no consideration taken for turning right, hitting speed bumps, potholes or steep driveways...
      You are making this much to difficult, as I did when I was developing Bad Ast... It is really a simple thing to make your car handle well on the street. Poly bushings, good shocks and a matched sway bar. That's all you need. The race car tech is just that, race car tech, and it does NOT apply or work well on a street car... Sperical pivots, sliders, angled springs and all that rot will not live on the street. Mud, water, grit and extreme conditions will eat them up and you will be putting stock stuff back on inside of a year.... quaranteed.
      You have to come to grips with the end use of the car and you said yourself it is a street car. Build a street suspension and you will save yourself a lot of time, money and lost effort...
      I am not trying to flame you here. I just want to think about what you are actually building.
      Mark
      I agree that most people over estimate the purpose of their build so let me give you as much detail as possible. I plan to go full pro-touring with this thing within the constraints of my budget. It will have to pull double-duty as my daily driver from the spring thru fall of next year, so I have all winter to build it. The drivetrain consists of an EFI Vortec 406 that EA's at 511 pk HP and 497 pk TQ (I know, I know, what do desktop dyno's know?) and either a 4L80E, 2004R or T-56 trans depending on what I can find. Rear end will be a stock 10 bolt narrowed with welded axle tubes and no higher than 3.42 gears depending on which tranny I use. A minutub is planned to go with the narrowed rear. Up front I'm planning on using SC&C UCA's with del-a-lum's and stock LCA's with del-a-lums, and rubber bushings everywhere else. Front coil rating and sway bar diameter are dependant on the overall suspension design. Eedelbrock IAS or Bilsteins at all four corners. An 8-point cage and sfc's as well as the pro-touring f-bodies g-braces will hold the chassis together. After the cage install, the car will be lightened as much as possible and "aredynamicised(?)" with a front-breather set-up through the stock grill and out of hood vents. Wheel well vents will be installed and a full belly pan, if I can figure out how to make it work with a leaf spring suspension. Please keep in mind that although it seems wildly ambitious for a street car, it will only be on the street 'til next winter at which point I would like to try my hand at some road racing. I don't want to invest now on parts that will come off in a year's time.




    Advertise on Pro-Touring.com