Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 12 of 12

    Threaded View

    1. #1
      Join Date
      Apr 2004
      Location
      OKC, OK
      Posts
      3,739
      Country Flag: United States

      Pros and Cons of Satchell Link Rear

      Well, it didn't take much to throw out the Chevelle rear. I was already wavering anyway. I still would like to use a Satchell link rear just purpose built. I would like to discuss the benefits of this design in this thread. I don't think it has been discussed enough in order to make an educated decision about using it.



      Here is the limitations I have. Lower control arms will mount in the same location as the leafs mounted but with new mounting brackets. Frame rails have been straightened to 32" front to back. I have installed a 2"x3"x.187 crossmember right where the rear floor and trunk pan meet behind the seat (Look at might site for pics if need be). I don't mind minimal intrusion into the ****pit and along as it does not further hinder the rear seat.

      I understand basic suspension design and theory but get start to get lost when numbers become involved. I don't have a program to play with to help me in that area yet. Hopefully we can use this thread to come to a better understanding of the Satchell link rear end. Thanks in advance for your help.

      Mike
      Mike Redpath
      Musclerodz & Customz
      405-288-0189
      pro-touring parts specialists
      Musclerodz.com

      facebook page
      http://www.facebook.com/#!/pages/Mus...73054649402015
      instagram
      Musclerodz





    Advertise on Pro-Touring.com