Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 14 of 14

    Thread: Header size?

    Hybrid View

    1. #1
      Join Date
      Aug 2001
      Location
      Connecticut
      Posts
      1,572
      Country Flag: United States
      1-3/4 are pretty good for most applicaions with improved heads- you shouldn't outgrow them and it still keeps some bottom end in it.

      1968 Camaro RS/SS, LS7 with Katech mods, T56 Magnum, C6Z06 Brakes
      1968 Camaro RS Convertible LS3/480hp/4L70E
      1962 Corvette 327-340hp stock
      1963 Corvette Split Window Coupe
      1967 Corvette L79 convertible
      2006 Corvette Z06
      2011 Corvette GS convertible



    2. #2
      Join Date
      Mar 2005
      Location
      Miamisburg, Oh
      Posts
      2,396
      You can throw out the thought of 1 7/8", those would be just too big for your bored-out 350. (even with your mods and future mods)

      That leaves you with the 1 5/8 and 1 3/4 options.
      I agree that the 1 3/4" will work and work relatively well, but I dont' see any great argument against the 1 5/8" either.

      You do realize that the bigger the pipe diameter, that this will move your torque peak into a slightly higher RPM band right? This is usually at the loss of a little low-end torque.


      So, if that is a willing trade-off, you could go with the 1 3/4", but if you put a lot of street miles on the car and only race occasionally, I'd get the 1 5/8". They are the normal size for your cubic inches and rpm range. 1 5/8" is not too small.


      JP, if you jump back in here, what are your thoughts concerning exhaust velocity and torque peaks for the 1 5/8"? Seems a better match to me...


      PS. If you had a 1st gen F-body, I'd sell ya my 1 3/4" ones.

    3. #3
      Join Date
      Apr 2006
      Posts
      168
      thats what im looking to do. Clean the junk in the vic jr and also the trick flows if i dont get new heads. Up the rockers to 1.6 and not sure on the 1 5/8 or 1 3/4 . It is a 1st gen camaro. I would like the torque down lower. Something that will boil the hides at 20.




    Advertise on Pro-Touring.com