Results 1 to 6 of 6
Thread: 1997 z28
-
08-14-2006 #1
Registered User
- Join Date
- Jun 2006
- Posts
- 120
1997 z28
does anyone know if i can put dual exaust on a 97 camaro? does it fit?
-
08-14-2006 #2
Registered User
- Join Date
- Oct 2005
- Location
- New Washington, IN
- Posts
- 1,509
Yep. Although it would not be emissions legal unless your car had 2 cats from the factory.
08-14-2006 #3
Registered User
- Join Date
- Aug 2005
- Location
- Hamilton, NJ
- Posts
- 4,319
Why bother? There are some fast 3rd & 4th gens running the 3" systems. The ones I have seen are either front axel dumps or really ugly with lots of bends.
Scott from NJ.
Vent Windows Forever! ...
Feather-light suspension, Konis just couldn't hold
I'm so glad I took a look inside your showroom doors
08-14-2006 #4
Registered User
- Join Date
- Feb 2005
- Location
- mo
- Posts
- 1,343
The problem with true dauls is that you have to run bullet mufflers to have any ground clearance.
Bmr make's a new upper panhard bar brace that will let you run the exhaust over the rear end and mount the mufflers all the way in the rear.
I run a single 4inch system on mine (94)that runs in the stock location.
A flowmaster cat back is areally good piece for stock to mild hp camaro.
08-14-2006 #5
Moderator / Sponsor
- Join Date
- Feb 2003
- Location
- Houston, TX
- Posts
- 3,446
actually, Flowmaster catbacks have shown to lose power on stock LS1 f-bodies. They just increase sound. Those aren't very popular with the LS1 guys.
To answer the original question, yes you can have a custom dual exhaust added to a 4th gen, but don't expect any performance gains over a well built 3" or 4" single system.
08-16-2006 #6
Registered User
- Join Date
- Mar 2005
- Posts
- 8
i had magnaflow on my firebird..3" cat-back and it sounded mean as well as increased hp slightly.
Reply With Quote
