Results 1 to 4 of 4
Thread: 4th gen booster
-
07-21-2006 #1
Registered User
- Join Date
- Feb 2003
- Location
- Sacramento, CA
- Posts
- 57
4th gen booster
i want to use a 4th gen camaro booster and master in my 2nd gen. mounting the booster looks simple. only question is what to do with the rod to the pedal? my stock one is almost 4 inches longer then the 4th gen. anyone done this conv? thanks!!!!
1972 Camaro LS6
-
07-22-2006 #2
Registered User
- Join Date
- Nov 2004
- Location
- Colorado
- Posts
- 1,260
The 5th gen vette one is a closer fit. You will have a fab up or modify mounting brackets, but the shaft is quite a bit longer. HTH
07-28-2006 #3
Registered User
- Join Date
- Dec 2005
- Location
- Dublin, CA
- Posts
- 502
I have a 4th gen corvette booster that I am putting in mine, but have not got it over to the shop to mock up yet. However, the shaft measures the same and the mounting studs are also the same, the only modification I can see needed is enlarging the brake lever mounting hole.
07-30-2006 #4
Registered User
- Join Date
- Feb 2003
- Location
- Sacramento, CA
- Posts
- 57
the 4th gen camaro mounted to the fire wall just fine for me. i grinded and drilled out the factory studs and it bolted right up. i will have to make a notch in the firewall where the push rod enters the cab and lengthen the rod to reach the pedel.
1972 Camaro LS6
Reply With Quote
