Results 1 to 5 of 5
-
07-10-2006 #1
Registered User
- Join Date
- Apr 2005
- Location
- Vail, Arizona
- Posts
- 660
Mark VIII and DC control problem...
Hi Everyone. I am having an issue with my fan/controller. It seems to always be on. Even if the car is off. I used the painless wiring harness for the car and used the fan control wire (gray wire from Painless harness) for the ignition on connection. I even pulled the fuse for the electric fan and it still pulls juice. So I disconnected it from the dc control, same thing. Whats going on here? The controller should not be supplying voltage to the fan if the car isnt running and especially if the "ignition on" signal is disconnected. Any ideas?
-
07-10-2006 #2
New to Pro-Touring
- Join Date
- Feb 2005
- Location
- Crooklyn, NY
- Posts
- 74
you disconnected the DC controller from the fan, and the fan is still running?
I took the restrictor plate off to give the Red Dragon a little more Juice. But keep that on the Down Low, it's not exactly street legal.
http://community.webshots.com/user/strokermotor
07-10-2006 #3
Full Blown G-Machiner
- Join Date
- Aug 2004
- Posts
- 609
You should not have a fuse for the fan-email me with your wiring diagram and I'll try to sort it out for you, Aaron. -Jabin
Gmachinz Sales and Performance
"updating the level of performance..."
[email protected]
*never argue with an idiot-they'll drag you down to their level and beat you with experience!*
07-10-2006 #4
Registered User
- Join Date
- Apr 2005
- Location
- Vail, Arizona
- Posts
- 660
I meant I disconnected the key on connection from the controller and the fan still pulls current.
07-11-2006 #5
New to Pro-Touring
- Join Date
- Feb 2005
- Location
- Crooklyn, NY
- Posts
- 74
do you have any of the "jumpers" installed, namely the UnderDrive jumper on pins 13 + 14?
I took the restrictor plate off to give the Red Dragon a little more Juice. But keep that on the Down Low, it's not exactly street legal.
http://community.webshots.com/user/strokermotor
Reply With Quote
