How would you fix this gap?

[BRIAN]

So hard to tell from pics. Did you try pulling the 1/4 inward from the rear sections? I would also try hanging rear bumper to see fitment. Somebody has to have measurment for you from gutter to gutter to determine where you are off. If it was the lid, was the poor gaps there before?? I would try and reserach and adjust the 1/4's before you modify the lid. That is a bit much to be off.


On the other hand if you do have a gap you want perfect either tig or mig the gap alomst closed than use a cut off wheel to get the perfect gap. Then make sure you have enough metal on both the front and back sides to metal finish. I would recommend lead but if not use as much metal as possible as bodo will chip and is not good in stressed areas. All metal is not a fix as most people think.