Results 1 to 3 of 3
Thread: Junk Yard Power Steering Box?
-
10-26-2004 #1
Registered User
- Join Date
- Aug 2004
- Posts
- 1,464
Junk Yard Power Steering Box?
OK,
My power steering box is a mess. Rather than plunk down close to 300 for a new box. I would rather save a bundle and go with a conversion of a junk yard box. What box is the best on to get that would be compatible with a 69 camaro with power steering? What parts would I need to be able to make the conversion necessary? Who makes them and where can I get them? Can I use the existing pitman arm as well? COME ON GUYS!! This question as been asked a couple of times on this board with no response. Some one please give it up.
Thanks
Mark
TOOFUN
-
10-26-2004 #2
Registered User
- Join Date
- Aug 2004
- Posts
- 582
Check out David pozzi's website for info on installing a 3rd gen box in a first gen
10-26-2004 #3
-ɹoʇɐɹǝpoW-
- Join Date
- Jul 2002
- Location
- Mesquite, TX
- Posts
- 4,941
Pretty sure I've posted this link before:
http://www.chevelles.com/techref/shea_3.html
It's a page on the Team Chevelle site written by a retired Saginaw employee, with all the particulars on different boxes.
http://www.chevelles.com/techref/shea_1.html
This one has the particulars on the conversion.
Reply With Quote
