The BAD AST Project - Faze II

[dusterbd13]

personally, i like to bring fuel lines up the back of the engine. keeps it visually cleaner. nore of a PITA to run, but worth it for form.



keep up the faith, mark. its the only way.

[astroracer]

personally, i like to bring fuel lines up the back of the engine. keeps it visually cleaner.

Thanks Mike, that's the plan. There is plenty of room to run the line up the back and I see no reason to have all of that extra line running forward for no reason.

After doing some looking at my brake line routing I determined they were going to have to move... They were in the way of the coilover spring...

Anywho, I re-routed them to the front side of the housing. I built some new brackets to bolt the clamps to and modified a junction block to mount off to the side of the punkin.
The brackets were pretty simple 7/8th's square pieces of 1/8th plate and the junction block bracket is the same stuff bent into a "U".

The little brackets were drilled and tapped for the 10-24 screws

The saddle bracket for the junction block got clearance holes for the screws. I modified the junction block by drilling and tapping for the screws. This will slip in under the bracket and get bolted in place.

I welded the brackets to the housing and mocked up the clamps and lines.

With the block screwed in place.


Pics of the clamps mocked up.

That will get the lines routed safely. I still have to get the FlexKore lines to finish this up.
Thanks for looking
Mark