The BAD AST Project - Faze II

[astroracer]

I got around to ordering the springs for the coil overs this week. Got them thru Speedway, they were on sale and, with free shipping, I saved a bit of cash.

Mocked up on a shock. I also got the Thrust bearings that go between the spring and lower seat.


Instead of welding on the brake tabs I decided to go with these bolt on guys. I think this will be a lot cleaner on the frame. As you can see I have them bolted down already.


I did have an issue with these though. As received the hole for the brake line was to small. I had to drill them out with a 5/8ths bit to get the line to go in.
This was one of the straight tabs I had been using.

This was the hole size in the new tabs...

.025 makes a big difference here.
Mark