The BAD AST Project - Faze II

[astroracer]

Got the rear suspension assembled tonight. It still fits... which is a good thing.
I rolled the housing underneath the frame after rolling it flat on the rotisserie. The better half helped hold the housing while I got the bars slipped into place.



With the bars all bolted up and the panhard bar in place I used a couple of tie down straps to get it raised up so I could connect the shocks.




I was also working on the upper shock attachments. right now there is a 1" hole drilled thru both sides of the upper cross member. I went to Durand and picked up a 4' piece of 1" O.D. x 1/4" wall D.O.M. and cut a couple of sleeves for the 1/2" bolts that hold the upper shock eyes. Once everything is pulled back apart I will weld these in.



Getting this hung in there tonight was enough for me. Tomorrow I'll start finishing up the brake line stuff.
Mark