Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 9 of 9
    1. #1
      Join Date
      May 2006
      Location
      New York
      Posts
      16

      LT1 Alternator alternatives

      I am interested in alternatives to the huuuge (Gen II) LT1 alternator.

      I would like to find something that I can use on the stock bracket that is less ... big..

      I picked up a set of cast aluminum bowtie valvecovers that I would really like to use on my motor. Alternator is in the way


      Any feedback is appreciated

      Scott
      1968 Chevrolet Camaro Sport Coupe
      2002 Chevrolet Camaro SS
      ------------------------------------


    2. #2
      Join Date
      Aug 2004
      Posts
      540
      I used a Power Master 57914 , which I think is a b-body part number. It's much lighter and smaller and the powermaster version still provides enough juice.
      Here's a picture, but it's not a very good angle.


    3. #3
      Join Date
      May 2006
      Location
      New York
      Posts
      16
      excellant John...thank you!!
      Scott
      1968 Chevrolet Camaro Sport Coupe
      2002 Chevrolet Camaro SS
      ------------------------------------

    4. #4
      Join Date
      Jul 2005
      Location
      Eastern Virginia
      Posts
      3,965
      Country Flag: United States
      I used the same as John. I got the info from his article in GM High Tech Performance. I bought the alternator off of ebay, it somehow was made to produce more amps, 140 I think. When I got it however, it would not fit on the F body bracket. I called them & they sent me a different housing that has the holes farther apart & it fits the F body bracket just fine.

      Scot
      Scot
      86 Monte SS


    5. #5
      Join Date
      May 2006
      Location
      New York
      Posts
      16
      Hey Scot..thanks for the additional info...
      Looks like exactly what I am looking for
      Scott
      1968 Chevrolet Camaro Sport Coupe
      2002 Chevrolet Camaro SS
      ------------------------------------

    6. #6
      Join Date
      Aug 2004
      Location
      NY
      Posts
      1,070
      Just make sure when they tell you the amp rating you ask how much it puts out at idle. You will be surprised how little some of the aftermarket deals put out at idle. That LT1 Vette Alt is pretty good quality piece. I did the exact same thing and had to change the pully on the alt to quicken not slow it's rpm or the engine would practically die with the accys on. That LT1 doesn't idle at 900rpm like a big cammed engine.

    7. #7
      Join Date
      Jun 2002
      Location
      Oregon
      Posts
      1,387
      Country Flag: United States
      Quote Originally Posted by JohnUlaszek
      I used a Power Master 57914 , which I think is a b-body part number. It's much lighter and smaller and the powermaster version still provides enough juice.
      Here's a picture, but it's not a very good angle.

      So will this actually clear the valve cover? I want to use some fabricated valve covers. Any other pics?
      Tony

    8. #8
      Join Date
      May 2006
      Location
      New York
      Posts
      16
      Quote Originally Posted by BRIAN
      Just make sure when they tell you the amp rating you ask how much it puts out at idle. You will be surprised how little some of the aftermarket deals put out at idle. That LT1 Vette Alt is pretty good quality piece. I did the exact same thing and had to change the pully on the alt to quicken not slow it's rpm or the engine would practically die with the accys on. That LT1 doesn't idle at 900rpm like a big cammed engine.
      Brian..ok cool..how much smaller of a pulley did you have to go?

      The alt is the only thing on the belt right now.
      No ac or p/s...that may help. I dont plan on a large stereo...

      thanks buddy..
      Scott
      1968 Chevrolet Camaro Sport Coupe
      2002 Chevrolet Camaro SS
      ------------------------------------

    9. #9
      Join Date
      Aug 2004
      Posts
      540
      Powermaster didn't say anything about having to change the pulley. It wouldn't hurt to call Powermaster first to get the idle rpm requirements.

      I will have to dig around to see if I have a shot that shows the rear view.




    Advertise on Pro-Touring.com