Results 1 to 4 of 4
Thread: body panels
-
10-24-2004 #1
Registered User
- Join Date
- Sep 2004
- Location
- CT
- Posts
- 208
body panels
My brother has a 69 bird and the 1/4's panels,floors and the rockers are good. The problem is that the whole trunk floor and both inner/outer wheel wells are shot. Is it possible to replace the trunk and wheel wells without taking the 1/4's panels off.
-
10-25-2004 #2
Registered User
- Join Date
- Nov 2003
- Location
- St. Louis area
- Posts
- 268
I know the inner and outer wheel wells will come out. I just removed both passenger side well housings this weekend on my Camaro. I've never replaced a trunk floor myself, so someone else will have to tell you about that. I doubt you would need to remove the quarters, though.
Nathan
10-25-2004 #3
Registered User
- Join Date
- Jan 2004
- Location
- NW Suburbs, Chicago
- Posts
- 560
I think your able to do it... I talked to a few guys about changing my rear frame rails out and they seemed to make it sound like you could do it without pulling rear quarters...
11-29-2004 #4
Registered User
- Join Date
- Aug 2004
- Location
- SoCal
- Posts
- 1,008
I replaced the trunk floor and then did the mini-tubs , without pulling the quarters.
Reply With Quote
