Results 1 to 2 of 2
Thread: Master cylinder angle
-
05-31-2006 #1
Registered User
- Join Date
- Jul 2005
- Location
- Crescent City,Ca.
- Posts
- 10
Master cylinder angle
Can anyone tell me why it is necesary for the master on a 67 camaro to set at such an angle,or can it be leveled paralell to the fire wall?
-
06-20-2006 #2
Registered User
- Join Date
- Feb 2006
- Location
- Elk Ridge, Utah
- Posts
- 602
Yes I can tell you why
with manual brakes its level and the reason is so it lines up with the hole on the brake peddal arm on the top hole
The power booster is angled to use the lower hole.
the reason is if you angle your manual mster cyl w some fabbed brakket and use the lower hole your leverage form the brake peddal will make it near impossible to stop the car.
and if you put the booster on it and leveld it and used the upper hole you would touch the pedal with a feather and go through the window
Its all about leverage
hope this answers you Q =) Ken F69 Camaro
W/D sub, Wilwood 13" brakes Bozeforged wheels 18X10 & 18X12,
Lateral dynamics 3 link ( custom setup ) Dana 60
lsX Twin Turbo, soon to come
Viper T56 in place (Yay)
Bought a running driving car so I can enjoy it before Im dead
LD 3 Link Installed into ^^^^^ (Yay)
Reply With Quote
