Victor from Precision is here to help.

[VictorT]

Well we know that there maybe some unhappy customers out there, and I have been asked to attend to all of you. What I need is any one who has had a problem with an order from Precision Brakes Company to PM OR CALL me with details, and I will do everything I can to get you taken care of. We as a company are dedicated to our customers, and I am making it a priority to make sure that the PT community knows this. This is an open opportunity to allow us to make things right with any of you guys that are or have been unhappy. Also all comments are welcome. I look forward to assisting you.

Friendly regards,

[Dan Sherwood]

Victor;

I ordered a new front end brake setup for my 67 camaro with dropped spindles from you over a month ago, and when I called you last week to follow up on it I thought you promised to get back with me and let me know when to expect the new product back, and hopefully before june. I've got the shop wanting me to get my parts delivered so they can get the car put together, and out of there.

Also, I believe previoulsy precision was giving a pt discount and free fluid with the order. I don't know if you gave me any kind of pt discount or not, but I know you charged for the fluid. You don't have to charge me if you don't want to. Thx!

[VictorT]

Dan,

I sent you a PM.

Regards

Victor;

I ordered a new front end brake setup for my 67 camaro with dropped spindles from you over a month ago, and when I called you last week to follow up on it I thought you promised to get back with me and let me know when to expect the new product back, and hopefully before june. I've got the shop wanting me to get my parts delivered so they can get the car put together, and out of there.

Also, I believe previoulsy precision was giving a pt discount and free fluid with the order. I don't know if you gave me any kind of pt discount or not, but I know you charged for the fluid. You don't have to charge me if you don't want to. Thx!

[Dan Sherwood]

Got it. Thx!

[groovyjay]

Here's the scoop:

I bought two (2) front big brake conversion kits for two (2) Corvettes and two (2) rear brake kits for the same two Corvettes. I paid $7500 US, I was told the kits would be ready in three weeks time. After few months the brake kits finally arrived, not only did I get some wrong parts like four (4) wrong rear rotors and all the front hat bolts, but there were few bits and pieces missing, like four
(4) front hat bolts, three washers and two master cylinders!!!

If the kits would have been otherwise perfect fit I could have excepted some of the flaws, but since the front calibers do not align with the rotor at all with the spacers provided in the kit I consider this to be a major risk to my own health, bad brakes may cause an accident and fatality.

My both cars still sit on jack stands, my whole summer seems to go down the drain, since I can't enjoy driving the cars.

Therefore I'm thinking about getting an attorney to handle this case, I have document everything since day one with all the emails, photos and videos.

I have tried contacting Brie and Joe for number of times with no luck, I hope you can help me sort this out...

[VictorT]

Hi there,

This is why I am here. I sent you a PM, so please contact me, and we will get this worked out.

Friendly regards,

Victor

[Dan Sherwood]

Victor-Maybe you could pm me concerning what my shop owner talked to you about this morning in regards to the hyrdaboost, and using the 4 piston dynalite kit off the front of my 69 with standard height spindles to go on the rear of my 67 camaro.

It's a 12 bolt with c clip eliminators. I understand we cannot use the whole kit, but are there some items we can use to help keep the cost down? Thx!

[THX 138]

Here's the scoop:

I bought two (2) front big brake conversion kits for two (2) Corvettes and two (2) rear brake kits for the same two Corvettes. I paid $7500 US, I was told the kits would be ready in three weeks time. After few months the brake kits finally arrived, not only did I get some wrong parts like four (4) wrong rear rotors and all the front hat bolts, but there were few bits and pieces missing, like four
(4) front hat bolts, three washers and two master cylinders!!!

If the kits would have been otherwise perfect fit I could have excepted some of the flaws, but since the front calibers do not align with the rotor at all with the spacers provided in the kit I consider this to be a major risk to my own health, bad brakes may cause an accident and fatality.

My both cars still sit on jack stands, my whole summer seems to go down the drain, since I can't enjoy driving the cars.

Therefore I'm thinking about getting an attorney to handle this case, I have document everything since day one with all the emails, photos and videos.

I have tried contacting Brie and Joe for number of times with no luck, I hope you can help me sort this out...

that '79 corvette on 20s is awesome! could you put a little more rubber on it though? What's the limitation?