power estimate

[V8bug]

I just need a horse power estimate for my engine. I changed the cam since the computer/torque converter did not like my last cam. I need the peak horse power and toqrue at their repective rpms to set up a basic VE table in megatune.



283 sbc bored 60 over, 292" I think, flat top pistons four valve relief, mid eighties 305 heads (I dont know the valve sizes, but they are stock) compression is around 9:1 I figure. Tuned port injection for a manifold. Headers dumping into 3" side pipes with galss packs. and the cam is a summit 1100 duration @.050 : 184int/194ex
lift : .368int/.398ex lobe seperation angle 109

I tired to go with a cam similar to a 305 tpi car, hope it works

thanks

[camaro608]

im guessing 275 hp
but i could be wrong