Results 1 to 4 of 4
Thread: Power steering bolts
-
05-04-2006 #1
Registered User
- Join Date
- Aug 2004
- Location
- Parkland Florida
- Posts
- 100
Power steering bolts
Im trying to put my new power steering pump on, its a sbc, teardrop shaped pump and I cannot find the bolt to attach the pump to the bracket!! Its the one in front of the pump. I also lost the bolts on the back, but was able to find replacements .
Your help is appreciated!
Jason
1968 Camaro convertible. 383ci, 700R4, C5 13" brakes up front and C5 wheels all around. Oh! anda Hydroboost unit too!
-
05-04-2006 #2
Registered User
- Join Date
- Nov 2000
- Location
- O-town
- Posts
- 4,330
Try Ace hardware??? J/Y, is it metric, man you need to ditch the 700 and shift,
Steve68- 1968 Camaro SS LSX T56, 12bolt 3:90's, 18" Fikse Profil 13s, Deep Fathom Green paint, Spearcos, just bunch of old junk because another member said so, LOL
70 Nova SS street/drag 454, T400, 3:55, ugly!
05-04-2006 #3
-Moderator-
- Join Date
- Apr 2001
- Location
- Central CA USA
- Posts
- 6,114
It's a 3/8" coarse thread, there should be a spacer between the pump body and bracket on the front lower bolt. I think the bolt is around 1" long, but double check that. I think the rear takes a stud.
David Pozzi http://www.pozziracing.com67 Camaro RS that will be faster than anything Mary owns.
05-05-2006 #4
Registered User
- Join Date
- Aug 2004
- Location
- Parkland Florida
- Posts
- 100
Thanks for the replies!! 3/8 is what I was looking for. Im not sure If I ever remember seeing a spacer on the front, but this will get me bolted up!!
Thanks as always
Jason1968 Camaro convertible. 383ci, 700R4, C5 13" brakes up front and C5 wheels all around. Oh! anda Hydroboost unit too!
Reply With Quote
