Results 1 to 4 of 4
Thread: Newbie 70 Cuda
-
04-29-2006 #1
Registered User
- Join Date
- Apr 2006
- Posts
- 2
Newbie 70 Cuda
Hey guys, just thought I'd introduce myself. been floating around here for a while now but never actually posted. I'm located in BC Canada. My current car is a AAR cuda clone. It is totally stripped right now but wil have an Alterktion K member front, caltrac bars, b-body rear end (narrower) A body springs (lower)in the rear - stance will be low all around. Wheels are 17x8 and 17X10 TTII's. Will have the AAR paint scheme but will be viper blue instead of B5, will have all AAR stuff such as the hood, spoiler, etc. Not sure if I will run the AAR side exhaust as the car is frame connected, has the caltrac bars etc and there is not much room, may just dump the exhaust or have it exit out the back??? Car was and automatic, is now a 4 speed. Interior will be basically stock, maybe aftermarket seats and I already built a Autometer dash for it. Engine has to be a smalblock to fit the AAR theme (my family also has acouple of HEMIs so I don't really feel the need to go bigblock) so I am building a 408 stroker, Indy heads, etc but will disguise it the best I can to make it look like the stock 340 sixpack, should make 550 horse 500-600 torque. Anyway, thats the plan for this car. Also on the hunt for a newer Mustang (03 or 04 Cobra or new GT) as I just sold my 2000 Gt and miss it. Next project will be a protouring bubbletop but that will be a ways off yet. Anyway, here's a couple of pics. One of the Cuda as it sits now that it is primed and temporarily off the rotiserrie and one of the long gone GT



Reply With Quote