Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 7 of 7

    Hybrid View

    1. #1
      Join Date
      Aug 2005
      Posts
      14
      I am old circle track racer and have run these for years. I have had a set on my '69 for 2 years now with no complaints. I cut a notch in the adjuster and tapered it 1/2 way around - fits great. I run 5"X11"X500# springs in the front.

      I set the ride height so the center of the ball joint is even with with center of the LCA mounting bolts. Right now I have to separate 1 ball joint and swing the LCA out of the way to pull the spring and adjuster. I am unable to adjust ride height with the spring/adjuster in place.



      To make re-assembly easier, I run two small bungie cords through the hole in frame to hold the adjuster in place and tight against the notch. Once the spring is in and the ball joint is together, I release the bungie cords and pull them out.

      I can adjust the ride height in about 1 hour. Over the weekend, one turn on the adjuster made about 1/8" change in ride height.


    2. #2
      Join Date
      Aug 2004
      Location
      Phoenix AZ
      Posts
      292
      I will let yall know how it goes.....we didnt cut a notch on the adjuster......we should have though.

      Reason is, the adusters sit at an angle, just a tade though. The car doesnt have any weight on it yet either....we are crossing our fingers, in hopes they will level out when the rest of the car is in place.

      The shock shaft looks like it will barley clear, so thier not installed yet either. The adjusters are welded in on the LCA's. We just have to wait and see what the car sits like.

      Worst case, we buy new LCA's and adjusters and notch them this time...ahahhhhhahahhh.

      The springs are 700lbs Hypercoils I think they are 9" ones. With the motor and trans installed and nothing what so ever else installed, the car loks to be sitting about an 1/12 shorter. We hope it drops a lot more. The adjusters all all the way down right now. Stay tunned for further developments.....lol




    Advertise on Pro-Touring.com