Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 17 of 17

    Threaded View

    1. #8
      Join Date
      Aug 2004
      Location
      Colorado
      Posts
      397
      Country Flag: United States
      Quote Originally Posted by Grandpa Ronsy

      Norwood, can you tell me the loads and mileage on your gear please and your R.P.M. limit?

      The cam that I'm running is a Reed I bought back in 1993.

      I just bought a new Comp cam solid roller cca-12-700-8 268/268 .525" and I assumed by now cam companies were all running iron gears on their solid roller camshafts so they would be compatitable with stock distributor gears?? (Probably a dumb assumption, right? )

      How could I tell if I have a steel gear or a iron gear? could I file the side of the gear and see if it was soft or hard.
      Ronsy,
      As far as load goes, I am guessing you want to know what springs I am using. I don't remember the rates or the Comp part number for them. The cam I am using is a custom grind, although loosely based on an Extreme Energy with around 240*@.050 " and .570" lift. Cam core is billet with a pressed on iron gear. The springs are a little lighter than the recommended spring. The idea was to save the lifters. So far I haven't heard any float up to 66-6800 RPM. I only have a couple thousand miles on the combo. I have inspected the dist. gear recently and it looks untouched. Like I said, I have no experience with a bronze gear for comparison. I don't know if one would show signs of wear yet or not.
      If you want to know for sure if you have an iron gear, I would call Comp. My cam has a different color than the very end/dist. drive section. I think the main part of the cam had a gold color to it between the lobes. The end gear section was grey.
      Good Luck
      Brett






    Advertise on Pro-Touring.com