Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 25

    Threaded View

    1. #10
      Join Date
      Nov 2005
      Location
      Auburn, WA
      Posts
      1,359
      Deepblue68, your calculations are incorrect. You need to subtract the PMOI for the hollow sections, since we are talking about hollow tubes. You can compare round tubes in the manner which you did, but not round to non-circular.

      The 4" tube will be more rigid for a given length. But for the manner in which you are talking about, it's all a wash. For a flat plane (chassis), I'd use rectangular tube for it's good torsional rigidity (4" tube isn't very practical) and great bending strength, something which it tough to get with round tube. The torsional stiffness of a flat chassis is very limited.



      Now, if you triangulate the chassis (with a cage or similar), then it's a whole different ballgame.
      Matt Jones
      Mechanical Engineer
      Art Morrison Enterprises





    Advertise on Pro-Touring.com