Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 580

    Hybrid View

    1. #1
      Join Date
      Oct 2004
      Location
      Delaware, OH
      Posts
      1,379
      Quote Originally Posted by NvrDun71
      Awesome man, a bolt in affair w/ no coil cutting really makes it nice. Looks as tho the DSE lowers gave you just enough extra drop w/ the drop spring pocket since you didnt have to hack the front coils down. Front wheels are on order, it started out as a three week build time that has turned into 5 weeks going on 6 so far, so hopefully any day now. At least the tires are here I guess....
      Yeah, actually the pockets in the DSE lowers were too deep for my tire/wheel set up. I had to install a pair of GW aluminum springs spacers (3/8") to gain a little tire->fenderwell and header->ground clearance (I may have already mentioned this to you - old age is a b!atch ). It sure did look bad-a$$ sitting down low though! I had to go with GW uppers to clear the tall-deck headers. Hope you get your wheels soon!



    2. #2
      Join Date
      Feb 2006
      Location
      SoCal
      Posts
      1,622
      Wow! Dan that is a sweet 3rd gen! You and 'Drew are definitely representing for all the 3rd genners!!! Very nice! It must be a blast to throw into corners now!!!!

      John
      '66 Chevy II - The "NEW" '69 Camaro!

      ***Under Construction***

      Build Update Link:

      https://www.pro-touring.com/forum/sh...ad.php?t=17108

    3. #3
      Join Date
      Oct 2004
      Location
      Delaware, OH
      Posts
      1,379
      Quote Originally Posted by novanutcase
      Wow! Dan that is a sweet 3rd gen! You and 'Drew are definitely representing for all the 3rd genners!!! Very nice! It must be a blast to throw into corners now!!!!
      John
      Thanks John! It's a lot of fun to drive, except for the fact that the back end constantly wants to pass the front!

      I think power steering is in my immediate future as well......

    4. #4
      Join Date
      Feb 2006
      Location
      SoCal
      Posts
      1,622
      Quote Originally Posted by dhardison
      Thanks John! It's a lot of fun to drive, except for the fact that the back end constantly wants to pass the front!

      I think power steering is in my immediate future as well......
      Too much oversteer?

      John
      '66 Chevy II - The "NEW" '69 Camaro!

      ***Under Construction***

      Build Update Link:

      https://www.pro-touring.com/forum/sh...ad.php?t=17108

    5. #5
      Join Date
      Oct 2004
      Location
      Delaware, OH
      Posts
      1,379
      Quote Originally Posted by novanutcase
      Too much oversteer?
      John
      Yeah, that and too heavy of a right-foot in the twisties. I had to R&R my Hotchkis rear sway with a Afco unit because the Hotchkis interfered with my new pre-fabbed exhaust system. The Hotchkis rear sway worked perfectly but the Afco does induce a bit more oversteer. It's not too bad and can be controlled with a little less throttle, but has taken some getting use to.

    6. #6
      Join Date
      Feb 2006
      Location
      SoCal
      Posts
      1,622
      Quote Originally Posted by dhardison
      Yeah, that and too heavy of a right-foot in the twisties. I had to R&R my Hotchkis rear sway with a Afco unit because the Hotchkis interfered with my new pre-fabbed exhaust system. The Hotchkis rear sway worked perfectly but the Afco does induce a bit more oversteer. It's not too bad and can be controlled with a little less throttle, but has taken some getting use to.
      You may want to try running a smaller rear bar. Depending on the car I'm driving I usually don't run a rear bar or if I do it's a small one.

      John
      '66 Chevy II - The "NEW" '69 Camaro!

      ***Under Construction***

      Build Update Link:

      https://www.pro-touring.com/forum/sh...ad.php?t=17108

    7. #7
      Join Date
      Oct 2004
      Location
      Delaware, OH
      Posts
      1,379
      Quote Originally Posted by novanutcase
      You may want to try running a smaller rear bar. Depending on the car I'm driving I usually don't run a rear bar or if I do it's a small one.

      John
      I agree. I'm planning on disconnecting the Afco and see what type difference it makes.

    8. #8
      Join Date
      May 2005
      Location
      St. Augustine, FL
      Posts
      1,529
      Quote Originally Posted by novanutcase
      Wow! Dan that is a sweet 3rd gen! You and 'Drew are definitely representing for all the 3rd genners!!! Very nice! It must be a blast to throw into corners now!!!!

      John
      Yeah, we just need to get him to a track day or autox. I know it will happen, I just cant wait to see some pictures.
      Andrew Petty

    9. #9
      Join Date
      Oct 2004
      Location
      Delaware, OH
      Posts
      1,379
      Quote Originally Posted by 69Nova
      Yeah, we just need to get him to a track day or autox. I know it will happen, I just cant wait to see some pictures.
      I considered taking the Nova to my scheduled track day at Mid-Ohio in August, but I figured for my first time I should take the SRT4 instead. I'd prefer to stuff the SRT4 in to the tire barrier vs. the Nova (although my insurance company wouldn't agree - not that they'd cover the damage anyway).

    10. #10
      Join Date
      May 2005
      Location
      St. Augustine, FL
      Posts
      1,529
      Quote Originally Posted by dhardison
      I considered taking the Nova to my scheduled track day at Mid-Ohio in August, but I figured for my first time I should take the SRT4 instead. I'd prefer to stuff the SRT4 in to the tire barrier vs. the Nova (although my insurance company wouldn't agree - not that they'd cover the damage anyway).
      I'd do the same thing too.
      Andrew Petty

    11. #11
      Join Date
      Aug 2006
      Location
      fort myers florida
      Posts
      200
      Dan that is a good looking Nova. It was nice to meet you and your dad on the power tour, and put real people to the name's and car's of these fourm's.

    12. #12
      Join Date
      Oct 2004
      Location
      Delaware, OH
      Posts
      1,379
      Quote Originally Posted by wayne70
      Dan that is a good looking Nova. It was nice to meet you and your dad on the power tour, and put real people to the name's and car's of these fourm's.
      Thanks Wayne, same goes for you and your Chevelle. It still amazes me you drive your car at that low, low ride height. Very cool and she looks great!

    13. #13
      Join Date
      Oct 2004
      Posts
      312
      hmm, Nova ? the Olds Omega its the same family ? i think so. here is a brandnew pic from my wifes Omega
      greets
      Klaus




    Advertise on Pro-Touring.com