Results 1 to 6 of 6
Thread: moldings
-
04-05-2006 #1
New to Pro-Touring
- Join Date
- Aug 2005
- Location
- Swden
- Posts
- 31
moldings
hi
I have repaird the are around the front and back window how do I Solve the problem with mounting the moldings becaus the small thingies tha the clips atatches to are gone beacaus of the rust repair. Any body have any tips.
Pardon my bad English.
R
-
04-06-2006 #2
Registered User
- Join Date
- Aug 2004
- Location
- Greenville, IL
- Posts
- 262
Is the glass installed or not? If not, here is a Carquest part number for some screws that replace the welded on studs: 8140012. If you have a stud gun for pulling dents, then there are kits that you use the gun to weld on new studs. If you don't have the gun then the screws work fine. Just don't try to over tighten them because they will either break or you will strip them.
Good Luck,
Joe
04-06-2006 #3
New to Pro-Touring
- Join Date
- Aug 2005
- Location
- Swden
- Posts
- 31
not
The glass is not installd.
Were do I find these screws
Tanks for the tip.
R
04-07-2006 #4
New to Pro-Touring
- Join Date
- Aug 2005
- Location
- Swden
- Posts
- 31
Can you order from carquest. Beacaus I live in Sweden.
R
04-07-2006 #5
Registered User
- Join Date
- Feb 2005
- Location
- Metro Detroit
- Posts
- 865
04-10-2006 #6
Registered User
- Join Date
- Aug 2004
- Location
- Greenville, IL
- Posts
- 262
Originally Posted by r.friborg
Yeah, I can order them but it would be easier to do this.
Either way will work. Let me know if you want me to order the screws and how many. I think they come 50/box.I'm a rookie and I know this one. Go to your local harware store and purchase small sheet metal screws. I bought them in stainless steel.
R.P.
Joe
Reply With Quote
