Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 25

    Threaded View

    1. #1
      Join Date
      Sep 2005
      Location
      San Francisco Area
      Posts
      44

      355 vs 383 build

      Got a good deal on a 350 short block bored .030 so was going to build as a 355, but many have told me to build a 383 stroker. Honestly I have driven one & read about them all the time, but don't know the difference. Are they 2 different animals comparison wise? If you had similiar HP & torque numbers what would make the 383 so different. I test drove one before I bought the one I have & it was nothing special.
      Anyways, unfortunetly money is a problem. I have a 327 currently in, but its very tired & needs to be replaced. I have new Edelbrock RPM heads that are less than a year old that I'm planning to take off the 327 & use on the 350 block. I figure it wouldn't set me back much to get it running as a 355, but the 383 has got me curious. What would this set me back to have it built locally in the bay area as a 383 instead? I plan to use it as a street car with my current th350 or possible 700r or 200r tranny in the future.






    Advertise on Pro-Touring.com