Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 10 of 10
    1. #1
      Join Date
      Jul 2005
      Location
      Mountain View, CA
      Posts
      9,583
      Country Flag: United States

      Window sill trim removal?

      I have the stainless trim that is at the top of the door. The one that wraps over from outside to right up next to the window felt. How is it retained? How do I remove it?

      True T.

      Whats new with Project 1/2-Trak?


      Follow my wisecracks on Sports, Food, Politics and other BS on Twitter.

      My blog

      When they kick out your front door, How you gonna come?
      With your hands on your head, Or on the trigger of your gun?


    2. #2
      Join Date
      Aug 2004
      Location
      Greenville, IL
      Posts
      262
      Country Flag: United States
      I am guessing you are referring to a first gen? If so there should be some screw on the inside holding it on. You will probably have to unbolt the glass from the regulator and lower it down further in the door. I don't think you can get to the screws in center w/o lowering the glass. Once you remove the screws, you should be able to pull it up off the door. Just becareful when reinstalling , especially on new paint as you will likely scratch the paint where it slides down. In other words if you push it down too far then you will have scratches visible below it.

      Be careful and good luck,
      Joe

    3. #3
      Join Date
      Jul 2005
      Location
      Mountain View, CA
      Posts
      9,583
      Country Flag: United States
      I am removing it completely. If there are any holes, I'll weld them closed.

      Thanks
      True T.

      Whats new with Project 1/2-Trak?


      Follow my wisecracks on Sports, Food, Politics and other BS on Twitter.

      My blog

      When they kick out your front door, How you gonna come?
      With your hands on your head, Or on the trigger of your gun?

    4. #4
      Join Date
      Aug 2004
      Location
      Greenville, IL
      Posts
      262
      Country Flag: United States
      If you are removing them completely, what are you using for an outer window felt? You are still going to need somethin out there, and you could reuse the holes to mount the new felt. There shouldn't be any holes under the mldg on the outside of the door.

    5. #5
      Join Date
      Jul 2005
      Location
      Mountain View, CA
      Posts
      9,583
      Country Flag: United States
      Oh, so the hardware that holds the felt also holds the trim? I see. Thanks, that's a few less holes to weld up. I'd like to find the retard that riveted on the door-ding trim on the side of the car and give him a
      True T.

      Whats new with Project 1/2-Trak?


      Follow my wisecracks on Sports, Food, Politics and other BS on Twitter.

      My blog

      When they kick out your front door, How you gonna come?
      With your hands on your head, Or on the trigger of your gun?

    6. #6
      Join Date
      Aug 2004
      Location
      Greenville, IL
      Posts
      262
      Country Flag: United States
      They drill holes through the edge of the door and rivited the cheap stick on door trim? That sucks to here. I don't know that I would weld the holes from the trim up, because you will still have to put some kind of window felt on there. I would try to reuse the holes to mount the new felts.

      Good luck,
      Joe

    7. #7
      Join Date
      Jul 2005
      Location
      Mountain View, CA
      Posts
      9,583
      Country Flag: United States
      Yeah I won't weld up the felt holder-downer holes.

      Yeah, the drilled right into the crease that runs the length of the car. Nice easy place to get smooth and striaght. Geez!
      True T.

      Whats new with Project 1/2-Trak?


      Follow my wisecracks on Sports, Food, Politics and other BS on Twitter.

      My blog

      When they kick out your front door, How you gonna come?
      With your hands on your head, Or on the trigger of your gun?

    8. #8
      Join Date
      Nov 2004
      Location
      NW Arkansas
      Posts
      1,742
      Quote Originally Posted by Damn True
      How do you really feel about the guy....LOL
      KENNY DAVIS HOTRODS

    9. #9
      Join Date
      Aug 2004
      Location
      Greenville, IL
      Posts
      262
      Country Flag: United States
      Quote Originally Posted by Damn True
      Yeah I won't weld up the felt holder-downer holes.

      Yeah, the drilled right into the crease that runs the length of the car. Nice easy place to get smooth and striaght. Geez!
      Damn that really sucks. Good luck w/ it.

      Joe

    10. #10
      Join Date
      Jul 2005
      Location
      Mountain View, CA
      Posts
      9,583
      Country Flag: United States
      Quote Originally Posted by Travis B
      How do you really feel about the guy....LOL
      My grandfather (bless his heart) used to take the car to "a friend" to get it worked on. The more I dig into this thing the more I am coming to the conclusion that that guy was a COMPLETE RETARD. Not to mention a freakin crook.
      True T.

      Whats new with Project 1/2-Trak?


      Follow my wisecracks on Sports, Food, Politics and other BS on Twitter.

      My blog

      When they kick out your front door, How you gonna come?
      With your hands on your head, Or on the trigger of your gun?




    Advertise on Pro-Touring.com