Results 1 to 4 of 4
Thread: trunk gutter replacement
-
03-23-2006 #1
Registered User
- Join Date
- Nov 2005
- Posts
- 200
trunk gutter replacement
I am replacing RH trunk gutter, but have a problem because the edge that it mounts to on the quarter is rotted also. see picture. I suppose I can piece the rim back together by fitting/welding replacement strips of metal.I do not know if I can buy a replacement section or if I would have to cut it from another quarter panel?
Curious to how a professional would fix this?
-
03-23-2006 #2
Registered User
- Join Date
- Dec 2004
- Location
- Houston Texas
- Posts
- 368
i'd bend a piece of sheetmetal into an L and use the shrinker to make the curves. that is only if the lower ridge is rusted out. i'd be happy to try and make one if you need it.
68 Camaro - never to be finished
06 Silverado - Forged 370, L92 Heads, big cam, 4l80e ect. eventual donor for the above
http://www.youtube.com/watch?v=KmB2y7uX38I
03-25-2006 #3
Registered User
- Join Date
- Dec 2004
- Location
- Houston Texas
- Posts
- 368
Hey actually i have this cut off of my car. the only thing it doesnt include is the rear bend (because the previous owner hacked it up pretty good) if you want it its yours for the price of shipping. i have both sides if you need them.
68 Camaro - never to be finished
06 Silverado - Forged 370, L92 Heads, big cam, 4l80e ect. eventual donor for the above
http://www.youtube.com/watch?v=KmB2y7uX38I
03-26-2006 #4
Registered User
- Join Date
- Nov 2005
- Posts
- 200
Really appreciate the offer! I do have to replace the rear bend, so let me see how that goes with fabing that and I will let you now if I need the rest.
Originally Posted by Camaro Zach
Reply With Quote
