Spun metal donuts

[jeff s]

Anyone know where I can get some?
I saw a source at the Hot Rod and Restoration Trade show last week, didn't pick up a card or literature, now I need some.
thanks,

[Matt@RFR]

I have no idea what a spun metal donut is, unless you're talking about metal spinning, in which case only half a donut is possible at a time.

[Nine Ball]

google:

http://www.covell.biz/donuts.htm

[J2speedandcustom]

www.chassisshop.com

[Steve Chryssos]

[Matt@RFR]

If that's what you're looking for, you can get them through www.chassisshop.com too.

And for the record, there's nothing spun about those.

[jeff s]

That's who's booth I saw them at, thanks a bunch!
I was told they spin each half of the donut from a flat, washer like disc, weld them around the OD then polish off the weld on the od.
The ones I saw at Indy had visible sanding marks around the OD.
thanks again
Jeff

[J2speedandcustom]

Yep the inside seam is open and not welded. They come is real handy when building exhasut...