Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 3 of 4 FirstFirst 1 2 3 4 LastLast
    Results 41 to 60 of 74
    1. #41
      Join Date
      Oct 2003
      Location
      Arvada, Co
      Posts
      2,119
      Country Flag: United States
      Quote Originally Posted by 1Fine69
      and what if it works??? i just saved myself a lot of time and energy. if not then i have a couple of other options.
      Everyone and I mean everyone who knows first gens and the geometry associated with them say it is a VERY bad idea to run them in anything other than a trailer queen. Do you really think you are the first to have this issue? Furthermore, do you think you are the first to try and think that a simple spacer will fix it Your issue is more than just the tie rods when a drop spindle is used. Have you heard the term scrub radius? Well, when you put that spacer on you will make the scrub radius worse. When you deal with something as dynamic as suspension often times when you cange one thing you make another worse. Keep It Simple Silly- K.I.S.S. You are wasting your time and energy trying to make these drop spindles work on your PT car. Your only options to do this right is go back to the stock spindle or buy ATS's spindle. That spindle has been specificly engineered for a PT application unlike the drop spindles that were engineered for a street rod application.

      Brian


      I have an unlimited budget. That bad part is I have already used it up.


    2. #42
      Join Date
      Aug 2004
      Location
      Iowa
      Posts
      137

      Re

      Alright this is getting or has gotten interesting. First off quite a few are saying drop spindles are a VERY bad Idea, well, why when I went to buy my UCA's and LCA's the person I spoke with, and ended up buying the 2" drop spindles from said everything would work very well with this set-up, but then explained to me what I could and couldn't do for the rest of my set-up. I really liked that he took the time to explain everything to me and how it worked, this was at Global West. NOW, it sounds like everything about drop spindles was and is a joke? How about the ATS's spindles? Does going from a 1" drop to a 2" drop make THAT big of a difference? Jeeez, I would think not, but I'm not for sure. Well, I've got my car almost finished, it's about time after 5 1/2 years! And my front suspension sits and works very well. Now, I don't have any intensions to run this thing in alot of road coarses, but if I chose to try a few I think this thing would be just fine. I do plan on also running it down the quarter mile a few times too. I also plan on showing it at quite a few car shows too. But most of all, I plan on driving it! Hopefully this falls into the "PT" catagory Whatever that means anymore. And thats all I have to say about that. Trond.

    3. #43
      Join Date
      Jan 2006
      Location
      New Jersey
      Posts
      323
      I would love to take your advice but dad has the last say. he wants to jsut "try" so i have to just "try". it makes sense both ways but we are not the experts. im just going to have to paly around a little to find out that it wont work i guess huh? what are you going to do? i have a question though. If i did get different rims with 4.5 or less backspacing and it cleared, would that be ok?
      1969 Camaro SS aka Jumpin Jack Flash

      World All Aluminum 427 and tko-600 attached to that



      http://www.cardomain.com/ride/2305230/1


    4. #44
      Join Date
      Aug 2004
      Location
      Iowa
      Posts
      137

      Re

      First off, I'm no expert. I've been a member here since 2004, I've been on this site checking it out, almost every day since. I've asked alot of questions, gave a little advice. Try what you can, you've got plenty of time. One thing though, in the end, do it the right way, don't do it halfass. Good luck,
      P.S. My setup works good on my car and looks good too. Later. Trond

    5. #45
      Join Date
      Oct 2003
      Location
      Arvada, Co
      Posts
      2,119
      Country Flag: United States
      Trond,

      I see what you are saying. There is, howerver, a huge differance between the two of you. It is that your rims fit and his do not. He is now suggesting on spending $500 to make $250 spindles fit when all he has to do is put the stock spindles back on for $0.

      GW was right that the drop spindles will work, but they are very far from being optimal. Did you talk to Doug or someone else at GW? It goes back to the suspension geometry. I would venture to guess that when you get a good feel for your car at the track you could notice a difference in handling between the stock and drop spindles if you had the car set at the same ride height.

      The ATS spindle was designed for handling. I know, I helped in the data gathering on the prototype. One inch does make that much of a diffenence when your are dealing with suspension design. My rims will ot fit on the ATS spindle. It has nothing to do with the design, but rather the direction I took on my front suspension. I have 17x8.5 with a 5.25 BS and they will hit the steering arm. A 18" rim with the same specs will fit and that is only .5" differance on the radius. I could never get my rims to fit with a 2" drop spindle. Those spindles are produced by hot rod people that have more interest in looks rather than perfomance.
      Brian


      I have an unlimited budget. That bad part is I have already used it up.

    6. #46
      Join Date
      Jan 2006
      Location
      New Jersey
      Posts
      323
      Will the stock spindle handle differently than a 2 inch drop spindle? Better or worse? And will the ats spindle work with my set up now? Tell me what you think baz
      1969 Camaro SS aka Jumpin Jack Flash

      World All Aluminum 427 and tko-600 attached to that



      http://www.cardomain.com/ride/2305230/1


    7. #47
      Join Date
      Jan 2006
      Location
      New Jersey
      Posts
      323
      And just for fun...rims suggestions. You never know



      i dont know why jsut the link comes up and not the picture
      1969 Camaro SS aka Jumpin Jack Flash

      World All Aluminum 427 and tko-600 attached to that



      http://www.cardomain.com/ride/2305230/1


    8. #48
      Join Date
      Oct 2003
      Location
      Arvada, Co
      Posts
      2,119
      Country Flag: United States
      Quote Originally Posted by 1Fine69
      Will the stock spindle handle differently than a 2 inch drop spindle? Better or worse? And will the ats spindle work with my set up now? Tell me what you think baz
      It depends on what you use for springs. Your sig states that you have QA1s. I am going to assume that they are the coilover conversion kit for the first gen. If so then yes. Read this thread if you have not done so: https://www.pro-touring.com/forum/sh...ad.php?t=16486 David Pozzi and myself explain what is going on with the geometry. Mr. Pozzi even linked a pic that my look very familier to you.

      Your best bet is to call ATS, Shane or Tyler, and give them your wheel specs, diameter, wheel width and BS. They will have a better idea if they will or not. I would guess yes they will work since my BS is pretty extreme for a first gen, but like I said check with them. Their taller spindle has even better geometry over stock with the lowering springs of the QA1's.
      Brian


      I have an unlimited budget. That bad part is I have already used it up.

    9. #49
      Join Date
      Jan 2006
      Location
      New Jersey
      Posts
      323
      ok so you think ats spindles?
      1969 Camaro SS aka Jumpin Jack Flash

      World All Aluminum 427 and tko-600 attached to that



      http://www.cardomain.com/ride/2305230/1


    10. #50
      Join Date
      Jan 2006
      Location
      New Jersey
      Posts
      323
      guess i should have read tat first huh? will ats spindle make the geometry better than the original spindles?
      1969 Camaro SS aka Jumpin Jack Flash

      World All Aluminum 427 and tko-600 attached to that



      http://www.cardomain.com/ride/2305230/1


    11. #51
      Join Date
      Oct 2003
      Location
      Arvada, Co
      Posts
      2,119
      Country Flag: United States
      Quote Originally Posted by 1Fine69
      guess i should have read tat first huh? will ats spindle make the geometry better than the original spindles?
      Yes. It work very much like the Guldstrand mod. Do a search for that if you are want more info as it would take way to much typing to explain it and it has been explained before. A little research will go a long way in you getting your car dialed just the way you want it.
      Brian


      I have an unlimited budget. That bad part is I have already used it up.

    12. #52
      Join Date
      Dec 2004
      Posts
      441
      Country Flag: United States
      I don't really understand the fixation on spending more $$ to make this right. I agree the AFX spindles are trick, but replacing the drop spindles with your factory ones and doing the guldstrand mod will go a long way towards bettering the suspension geometry. Unless you already got rid of the stock spindles, or there is some defect to them...?

    13. #53
      Join Date
      Jan 2006
      Location
      New Jersey
      Posts
      323
      nope, still have stock ones. the thing is is that i sprayed the new heidts spindles black and im not sure they will take them back so im kidna screwed.
      1969 Camaro SS aka Jumpin Jack Flash

      World All Aluminum 427 and tko-600 attached to that



      http://www.cardomain.com/ride/2305230/1


    14. #54
      Join Date
      Aug 2004
      Location
      Northern Indiana
      Posts
      588
      You can always, use laquer thinner and remove the paint...worst scenario you can use stripper and use thinner to clean of residue. My opinion is to put the stock spindles back on....alot cheaper than new wheels. I know its a pain in the @$$ to take it all back apart and then you have to get 2" drop springs, but it "is" what you need to do. Ebay those spindle is Heidts wont take them back.
      "Champagne taste on a beer pocket book."

    15. #55
      Join Date
      Jan 2006
      Location
      New Jersey
      Posts
      323
      thats true. but i have one major concern. Which will make my car handle/perform/feel/look better. Stock or dropped spindles?
      1969 Camaro SS aka Jumpin Jack Flash

      World All Aluminum 427 and tko-600 attached to that



      http://www.cardomain.com/ride/2305230/1


    16. #56
      Join Date
      Dec 2004
      Posts
      441
      Country Flag: United States
      "...handle/perform/feel/look better. Stock or dropped spindles?"

      handle/perform/feel(better)-stock

      look better-I think is a moot point. With the appropriate springs you should be able to obtain the same stance.

      Again, if you have the funds the ATS spindles would be a good option as well. You could always upgrade at a later time too.

    17. #57
      Join Date
      Oct 2003
      Location
      Arvada, Co
      Posts
      2,119
      Country Flag: United States
      Quote Originally Posted by bretcopsey
      I don't really understand the fixation on spending more $$ to make this right. I agree the AFX spindles are trick, but replacing the drop spindles with your factory ones and doing the guldstrand mod will go a long way towards bettering the suspension geometry. Unless you already got rid of the stock spindles, or there is some defect to them...?
      I agree hear, but it seems he did not want to go with the stock spindles so IMO I supplied the best solution to what he wanted to do.

      The cheapest would be stock spindle with the Guldstrand mod. Another problem made worse by using 2" drop spindles and lowering springs is that the subframe will be to low to the ground. It can hit at bumps, braking and potholes. In ones opinion it may look good, but totaly impractical for any performance application.
      Brian


      I have an unlimited budget. That bad part is I have already used it up.

    18. #58
      Join Date
      Jan 2006
      Location
      New Jersey
      Posts
      323
      HEY! good news! my dad talked to heidts and we made sure to ask what the real "purpose" of drop spindles were...his reply....just to make it look better. FINALLY. me and pops are starting to take it appart tomorow. Take the paint off the drop spindles, and put the stock ones back in. We have a lot more room to lower it with the springs anyway. I can thank you guys enough for your help. You steered me in the right direction and as always your expert advice always won. I cant wait to get the stock ones back on and ride! I get to keep my rims, handling, and good stance. One thing to add though. I would liek to comment on Heidts service.
      1969 Camaro SS aka Jumpin Jack Flash

      World All Aluminum 427 and tko-600 attached to that



      http://www.cardomain.com/ride/2305230/1


    19. #59
      Join Date
      Jan 2006
      Location
      New Jersey
      Posts
      323
      My and my dad called heidts up. we used the info we got here to push him into the corner. We acted like we were thinkinking about buying 2 inch dropped spindles. ( even though we already had) We asked if there would be any problems and guess what he said. "oh no man we have a mock up of a 69 right here, no problems at all even with 17's" GOTCHA! Me and my dad both looked at each other and said hmmmm, what a great company policy huh? i cant believe that he would lie to a potential customer so oppenly. Im not so sure if he knew what type of customer he was talking to In return for all your help i would like to warn any cusomer who looks to use Heidt's as a company in the future. Im not sure if i should make a new thread for this to warn more people, but tell me if i should.
      1969 Camaro SS aka Jumpin Jack Flash

      World All Aluminum 427 and tko-600 attached to that



      http://www.cardomain.com/ride/2305230/1


    20. #60
      Join Date
      Jul 2005
      Location
      Mountain View, CA
      Posts
      9,583
      Country Flag: United States
      No reason to start another thread. We all know what Heidt's stuff is about. That's why we've been telling you for days to ditch it.

      Glad to hear you are headed in the right direction. Put your OE spindles on, get some good springs and do the G-mod and you will have a very nice handling car that looks nice too. Rather than one that looks nice....but....you can't turn the wheels.
      True T.

      Whats new with Project 1/2-Trak?


      Follow my wisecracks on Sports, Food, Politics and other BS on Twitter.

      My blog

      When they kick out your front door, How you gonna come?
      With your hands on your head, Or on the trigger of your gun?

    Page 3 of 4 FirstFirst 1 2 3 4 LastLast



    Advertise on Pro-Touring.com