Results 1 to 7 of 7
Thread: Wont run right.
-
03-15-2006 #1
Registered User
- Join Date
- Jun 2005
- Posts
- 11
Wont run right.
how willl a car run, if at all with the distributor 180 out..sbc hei
-
03-15-2006 #2
New to Pro-Touring
- Join Date
- Nov 2004
- Posts
- 78
If you even get it started it will run very choppy as if it were missing....and when you think about it, it technically is missing I guess if it isn't firing at the right time.
If you think its 180 out, then just pull the cap and see where the
rotor is pointing in relation to the number 1 terminal. if it is 180 out, then undo the hold down and rotate the rotor 180. Or an easier fix would be to re-run the cables to match. You would need longer cables most likely.
Easy fix, don't fret.Get Blended
03-15-2006 #3
Registered User
- Join Date
- Jun 2005
- Posts
- 11
thanks..thing is..it runs great at idle, just rattles a lot like its got water in the gas (it doesnt) under acceleration..
03-15-2006 #4
Registered User
- Join Date
- Mar 2005
- Location
- Detroit Subs
- Posts
- 201
Sounds like it is to advanced.
03-15-2006 #5
New to Pro-Touring
- Join Date
- Nov 2004
- Posts
- 78
At what RPM are you idling at? Might be too slow. What about a vacuum leak. If there are no leaks you will have a nice smooth idle. Any little leak will affect the way it idles.
Get Blended
03-18-2006 #6
Registered User
- Join Date
- Jun 2005
- Posts
- 11
idles very smoothe
Originally Posted by 68camaro396
03-19-2006 #7
Registered User
- Join Date
- Dec 2000
- Location
- NE Florida
- Posts
- 2,483
Is this a vac advance HEI, or an aftermarket unit w/o an advance? What is the idle / full timing set at?
What do you mean 'rattles alot'? describe the symptoms with more detail.
Reply With Quote
