Results 1 to 5 of 5
Thread: Tire Clearance
-
10-07-2004 #1
New to Pro-Touring
- Join Date
- Aug 2003
- Location
- Dayton ohio
- Posts
- 20
Tire Clearance
Was looking for some information about minimum tire to rear quarter lip clearance. Will be running a 3 link with a PHB and want minimum clearance without rubbing. Any thoughts 1/2", 1" etc.?
Jeff
-
10-07-2004 #2
Starting The Transformation
- Join Date
- Aug 2004
- Location
- Clarendon Hills IL.
- Posts
- 131
I'd say atleast a 1/2". My challenger has 3/4" clearence on each side. And I run 335's out back. It's alway's better too be safe then sorry and ruin a pair of expensive tire's.
10-07-2004 #3dennis68 GuestMy Elco runs about 1/4", worries me sometimes when I hit dips during high speed cornering. I always wonder if today is the day it cuts down a tire, I would shoot for 1/2" or better if possible. A 3-link/PHB set up is pretty solid, but that axle IS going to move no matter what you do, especially with the PHB.
10-09-2004 #4
Registered User
- Join Date
- Jun 2002
- Location
- Oregon
- Posts
- 1,387
DSE told me 1/2" is what they shoot for as a min....so this is what I went with as well.
Tony
10-10-2004 #5
New to Pro-Touring
- Join Date
- Aug 2003
- Location
- Dayton ohio
- Posts
- 20
Tire Clearance
Looks like I'll be using 1/2". Thanks for the replies.
Jeff
Reply With Quote
