Results 1 to 3 of 3
Thread: 69 camaro compressor location
-
03-03-2006 #1
Full Blown G-Machiner
- Join Date
- Nov 2005
- Location
- zachary louisiana
- Posts
- 606
69 camaro compressor location
right now my compressor is on the driver side with a long ugle hose all the way across the motor to the other side of the firewall...i dont know if this is liek that on all 69's but i hate it...my boss has a 68 and it is on the passenger side and is alot neater....o by the way this is stock a/c....so can i jsut buy the brakets for the 68 and move the compresser to the passenger side and the alternator to the drivers side and jsut get a new hose made....i think this would look a whole lot better....any thoughts
1969 camaro ss 372,hotchkis tvs, comp cams 268xe, world products heads, zz4 intake, 670 holley, msd setup eagle alloy 212's, autometer ultra lites......99 console with megashifter, ls1 brakes and a soon to be 700r-4
http://http://www.cardomain.com/ride/2246580
-
03-03-2006 #2
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Newbury Park, CA
- Posts
- 5,837
It's not a simple bolt-in unless you change to a short water pump and swap the entire accessory drive system. You will also have to rewire most of the front harness.
Also, it is much easier to deal with the #8 and #6 plugs with the compressor on the LH side.VaporWorx. We Give You Gas http://www.vaporworx.com
03-03-2006 #3
Registered User
- Join Date
- Aug 2005
- Location
- Hamilton, NJ
- Posts
- 4,314
What if he switched to an R4 compressor?
Scott from NJ.
Vent Windows Forever! ...
Feather-light suspension, Konis just couldn't hold
I'm so glad I took a look inside your showroom doors
Reply With Quote
