Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 16 of 16

    Threaded View

    1. #14
      Join Date
      Jun 2001
      Location
      Newbury Park, CA
      Posts
      5,839
      Country Flag: United States
      The F/R brake bias is the primary factor causing rear brake lockup on aftermarket systems. This is especially true when stock rear drum brakes, with a low required line pressure, are mixed with an aftermarket front disk caliper that requires a significantly higher line pressure to work. The two do typically do not mix well.

      For those that remember Craig Boone, he spun out twice during a 0-100-0 mph derby. His car had 4-wheel disks, but the rear calipers were poorly matched to the fronts, and the rear brakes locked prematurely. He spun out, and the requisite changing of the shorts was needed.

      VaporWorx. We Give You Gas http://www.vaporworx.com





    Advertise on Pro-Touring.com