Results 1 to 3 of 3
Thread: Please Help!
-
02-11-2006 #1
New to Pro-Touring
- Join Date
- Feb 2006
- Posts
- 2
Please Help!
It looks like this is the board to get the help we needed! We have a 1968 Camaro that we want to put wheels on that are off of my 1993 Corvette. The Vet wheels are aftermarket z06 in a 17x9.5" size all around.
We have had too much conflicting info from local shops so does anyone know the best sized spacers to get?
We found a billet set of 2.5" for $90 so I hope that is the best size.
Any help is much needed!!
Luv My '68!
-
02-11-2006 #2
-Moderator/Rat Pack/Sponsor-
- Join Date
- Oct 2004
- Location
- Macon, Ga.
- Posts
- 8,085
Repost this in the wheel and tire section. Someone will help there I am sure.
Welcome to the site btw and show us your cars.Bill
Trailers are for BOATS!
02-11-2006 #3
-ɹoʇɐɹǝpoW-
- Join Date
- Jul 2002
- Location
- Mesquite, TX
- Posts
- 4,941
Welcome aboard, brandynmarie (Should we call you Brandy? Marie? Something else?).
Saw that you posted in that other thread, having neither a Camaro nor Z06 wheels I can't give specific numbers but I can point out that the manufacturing tolerances these cars were built to back in the 60s were large enough that regardless of what wheel fits on car A, identical car B may need a little more or less offset and the only real way to know for sure is to measure.
Anyway. Welcome aboard. We'd love to see pics of your cars.
Reply With Quote
