Speedway Engineering Sway Bar

[68ls1]

There are several advantages to running this type of bar.
1) The biggest benefit would be the ability to get exactly the rate your looking for as opposed to a normal aftermarket bar that comes with whatever rate the manufacturer feels is right for the application. Because changes in weight distribution and weight in general (aluminum small block or heads, battery moved etc...) will affect the desired rate, having a set rate can be a detriment.
2) For me personaly it will be far easier to package than a pre-bent aftermarket bar. Because of a non factory subframe, wheel clearence issues, fabricated control arms...trying to make a 'Camaro' sway bar work wouldn't be worth the headache.
3) Not only can you find bar with the rate you need at the start, the rate is also adjustable. By varying the length of the arm connecting the bar to the LCA you change the spring rate as well. New arms are not required for small changes, simply moving the rod attaching the arm to the LCA will work.
4) They are fairly economical.
5) Mounting is very straight forward.

The only downfall to a setup like this may, in fact, be point number 1 above. Before ordering, time should be taken to calculate what kind of rate would best suit you. The end user actually has to think about what is required and not simply bolt 'er on. Do your research and you'll be happy. Buy the biggest baddest bar just because it looks cool and thats what your neighbors brothers buddy (the one with the mullet) said he would run and chances are you won't.



My .02

Noel.