Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 10 of 10
    1. #1
      Join Date
      Nov 2005
      Posts
      7

      Lunati voodoo cams?

      Anybody running one of these cams yet? I am now in the process of getting ready to do my engine and these cams have piqued my interest. Was just wondering if anybody has tried one yet and what do you think about them?



    2. #2
      Join Date
      Jun 2001
      Location
      Orlando, FL
      Posts
      10,604
      Country Flag: United States
      I've got one going in mine ... it'll be on the dyno in a week or so.

      jp
      ​John Parsons

      UnRivaled Rides -- Modern upgrades for your ride.

      UnRivaled Rides recent project -- LS9-powered 69 Camaro

    3. #3
      Join Date
      Dec 2005
      Location
      TuoCo, CA
      Posts
      992
      Country Flag: United States
      Quote Originally Posted by parsonsj
      I've got one going in mine ... it'll be on the dyno in a week or so.

      jp

      which cam are you using? what motor are you putting it into?
      Thinking about a 60104 for my 350.
      Steve
      '68 Camaro - SBC, TKO600, 3.73 Moser 12-bolt, Speedtech, ATS-AFX, Hotchkis, Forgeline, Ron Davis and C5 brakes (Kore3), Holley Terminator TBI.
      Check it Out Here

    4. #4
      Join Date
      Nov 2005
      Posts
      7
      that is the one I was about also. 104. let us know what you get on the dyno

    5. #5
      Join Date
      Aug 2004
      Location
      McMurdo Station, Antarctica
      Posts
      211
      Alot of folks over at Team-Chevelle are running them. Harold Brookshire, the designer of the VooDoo line of cams post commonly over there in the Performance section. Search over there and you should get some feedback.
      R.J.


    6. #6
      Join Date
      Sep 2002
      Location
      San Jose, CA
      Posts
      1,793
      I've heard good things... but there is no magic at work here. Valve events are valve events
      1971 Camaro, 383 stroker ~500HP,M21 Trans with lightened flywheel. All Sorts of Auto-x Goodness in the Suspension. 12" Brakes ->SOLD

      But ask me about my 2004 STi Auto-x car...

      Just call me Brett

    7. #7
      Join Date
      Jun 2001
      Location
      Orlando, FL
      Posts
      10,604
      Country Flag: United States
      which cam are you using? what motor are you putting it into?
      It's going in my 427 LS2, and is a brand new cam supposedly custom ground with the "Voodoo" ramps. I'll know more about it when I get out to see it on the dyno. Any day now.

      jp
      ​John Parsons

      UnRivaled Rides -- Modern upgrades for your ride.

      UnRivaled Rides recent project -- LS9-powered 69 Camaro

    8. #8
      Join Date
      Dec 2005
      Location
      TuoCo, CA
      Posts
      992
      Country Flag: United States
      I ordered mine today, it'll be a few weeks before I get it in.
      Steve
      '68 Camaro - SBC, TKO600, 3.73 Moser 12-bolt, Speedtech, ATS-AFX, Hotchkis, Forgeline, Ron Davis and C5 brakes (Kore3), Holley Terminator TBI.
      Check it Out Here

    9. #9
      Join Date
      Nov 2004
      Posts
      73
      I'm really interested in the reliability of these grinds. The valve action seems somewhat extreme.

      Not necessarily related to your flat tappet application, but I have been looking at their solid roller cams for a motor I'm building, and I was worried about running them on a street car because the valve springs they recommend are a bit stiffer from what many folks say is streetable. Their recommended seat and open pressures are around 220, and 550 respectively, which is more than the generally accepted 450 open pressure that I have read repeatably for a street driven car. Of course if your going to check the lifters on a regular basis, I guess it wouldn't be a problem. Since I already have springs that aren't stiff enough, and don't want to risk blowing stuff up, I have to stick with the slow action comp roller.

      From what I read over at Team Chevelle, with their flat tappet grinds they keep .019" away from the edge of the lifter at all times to avoid reliability problems. More area under the curve is a good thing, and I bet they work well. The guy that posts about them is UDHarold, as he used to work for Ultradyne.

      ~~fred

    10. #10
      Join Date
      Aug 2004
      Posts
      19
      As an FYI, UDHarold, Harold Brookshire, was the owner/cam designer for Ultradyne.




    Advertise on Pro-Touring.com