Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 14 of 14

    Hybrid View

    1. #1
      Join Date
      Mar 2004
      Location
      Mid-Michigan
      Posts
      2,764
      Country Flag: United States
      You did what you had to do Jason. The J-clips are spring steel and rust very quickly. Once the bolts get "locked" into the threaded portion with rust all you will do is spin the J-clip apart when you put any kind of torque on the bolt.
      I would suggest cleaning up your access holes and making a cover for them. Use stainless fasteners to bolt the pockets back in and, if you need to take them back out, simply pull the covers and unbolt them...
      Mark

      Mark:
      "Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
      This my Bad Ast thread...
      https://www.pro-touring.com/showthre...roject-Faze-II
      This is my Fotki album...
      http://astroracer.fotki.com/


    2. #2
      Join Date
      Jul 2002
      Location
      Muskegon, MI
      Posts
      4,494
      Yes Jason you did exactly what most people have to do when these break and just start spinning. Some people cut a notch in the frame others cut a hole in the floor. Mark (astroracer)had some great advice too about plugging the hole and using stainless fasteners.
      Adam_______Offical Car Name "ILLUSION"
      383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
      ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign




    Advertise on Pro-Touring.com