Results 1 to 16 of 16
Thread: Oilpump question csb
-
01-27-2006 #1
New to Pro-Touring
- Join Date
- Dec 2004
- Posts
- 36
Oilpump question csb
Which type of brand on the Oilpump would you use for an Csb street engine that has an oilcooler?
All under 6.27 litres is a starter.
-
01-31-2006 #2
New to Pro-Touring
- Join Date
- Dec 2004
- Posts
- 36
Wow!! What a response!!
All under 6.27 litres is a starter.
-
01-31-2006 #3
Registered User
- Join Date
- Oct 2005
- Location
- New Washington, IN
- Posts
- 1,510
Most people run a Melling, kinda the industry standard.
-
02-01-2006 #4
New to Pro-Touring
- Join Date
- Dec 2004
- Posts
- 36
So you are telling me that the most of you are using the cheapest one?
All under 6.27 litres is a starter.
-
02-01-2006 #5
-ɹoʇɐɹǝpoW-
- Join Date
- Jul 2002
- Location
- Mesquite, TX
- Posts
- 4,941
Um. What's a csb street engine?
-
02-01-2006 #6
Full Blown G-Machiner
- Join Date
- Nov 2004
- Location
- Roanoke, VA
- Posts
- 515
Just a guess here but I think its a typo and he meant SBC. If it isnt a sbc then I have no idea what a csb is.
Assuming its a sbc then a Melling M55A will be more than adequate.GMC Syclone (currently wrecked thanks to the typical rubber headed VA driver not paying attention to his red stop light...oh and he didnt have insurance either)
#614 11.9 @ 113
New stuff finished 08/06:
4L80E trans w/TCI PCM
Front: J&S UCA/LCA, QA1 coil overs
Rear: Caltracks/Belltech drop leaves
Empire drive line alum drive shaft
Polished 17x9 F/17x11 R ZR1s with 275s/315s
Syclone
Tow rig
-
02-01-2006 #7
New to Pro-Touring
- Join Date
- Dec 2004
- Posts
- 36
Oops! My bad! Chevy small block, i´m thinking about using 10553 pump or 10552 standard volume
All under 6.27 litres is a starter.
02-01-2006 #8
-ɹoʇɐɹǝpoW-
- Join Date
- Jul 2002
- Location
- Mesquite, TX
- Posts
- 4,941
That might help you get responses (I don't think I'd seen it written CSB before, typically written SBC).
Can't help you though; my BBC has a Melling high volume (don't remember the PN though) and my LS1 has a ported GM piece.
02-03-2006 #9
New to Pro-Touring
- Join Date
- Dec 2004
- Posts
- 36
Oilpump question sbc
---
All under 6.27 litres is a starter.
02-03-2006 #10
Registered User
- Join Date
- Oct 2005
- Location
- New Washington, IN
- Posts
- 1,510
Just because the melling is cheap, doesn't mean its no good.
$$ does not always equal Quality.
02-04-2006 #11
New to Pro-Touring
- Join Date
- Dec 2004
- Posts
- 36
Is it American made?
All under 6.27 litres is a starter.
02-04-2006 #12
Registered User
- Join Date
- Oct 2005
- Location
- New Washington, IN
- Posts
- 1,510
Don't know, but is anything american made anymore?
02-04-2006 #13
Registered User
- Join Date
- Apr 2001
- Location
- Rockford Illinois
- Posts
- 3,949
I have never used one or have ever known someone who has but I believe there is a pump made by Gearotor or something like that I saw in a circle track article once. They made great claims about how great they were but maybe the price doesn't make them worth it?
The last Melling box I saw 8yrs ago said made in USA.
Jim Nilsen
02-04-2006 #14
Full Blown G-Machiner
- Join Date
- Nov 2004
- Location
- Roanoke, VA
- Posts
- 515
Originally Posted by 383
The Melling? The last one I bolted on about a week ago was made in USA as well as all of the previous Melling units Ive had my hands on. Ive used several dozen of these pumps and have only had a problem with one of them in that time and it was just a broken bypass spring.GMC Syclone (currently wrecked thanks to the typical rubber headed VA driver not paying attention to his red stop light...oh and he didnt have insurance either)
#614 11.9 @ 113
New stuff finished 08/06:
4L80E trans w/TCI PCM
Front: J&S UCA/LCA, QA1 coil overs
Rear: Caltracks/Belltech drop leaves
Empire drive line alum drive shaft
Polished 17x9 F/17x11 R ZR1s with 275s/315s
Syclone
Tow rig
02-04-2006 #15
-Moderator-
- Join Date
- Jul 2005
- Location
- Mountain View, CA
- Posts
- 9,583
Melling pumps:
I built a 351W in 1988. Sold it, and the Cougar it was in to a buddy in 1991. He still has it. The top end has seen many different configurations since then and currently is sporting a big centrifugal supercharger. It is still running the same Melling pump I put in it back then and even with over 100k on the bottom end everything is still solid.True T.
Whats new with Project 1/2-Trak?
Follow my wisecracks on Sports, Food, Politics and other BS on Twitter.
My blog
When they kick out your front door, How you gonna come?
With your hands on your head, Or on the trigger of your gun?
02-08-2006 #16
Registered User
- Join Date
- Nov 2004
- Posts
- 504
As stated, Melling is pretty much the standard. If you decide on the 10552/10553 pump with the bolt-on pickup, be aware that the pickups that Melling offers for this pump may or may not work with aftermarket oil pans. Most of the aftermarket pans have pickups designed for the M55 pumps.
Reply With Quote
