Results 1 to 7 of 7
Thread: gen7 question
Hybrid View
-
01-24-2006 #1
Registered User
- Join Date
- Jan 2006
- Location
- Milwaukee WI.
- Posts
- 345
I assume you have a wideband. You need to set up your commanded afr table first. Then tune the ve table. The computer is automatically adding more or less fuel when in closed loop. Start with 13.5-14.7 accross the board, in the last 3 columns of the afr table, taper it down to about 12:1 and start from there. Hope this gets you started!
-
01-25-2006 #2
Registered User
- Join Date
- Jan 2006
- Location
- brick,new jersey
- Posts
- 28
thats how i did it...i set up the a:f table just like you suggested..and yes i do have a wideband...but like i said, its way rich beyond where i can adjust it on the ve table...any other suggestions???thanks for your help..
mike
01-25-2006 #3
Registered User
- Join Date
- Aug 2001
- Location
- Wilton, CA. (Sacramento)
- Posts
- 2,995
Do you have the injector size, etc. in config correctly? What fuel pressure are you running?
Jody
01-25-2006 #4
Registered User
- Join Date
- Jan 2006
- Location
- brick,new jersey
- Posts
- 28
yeah all of that is correct...fuel pressure is set at 42lbs...
mike
Reply With Quote
