1969 Corvette

[jimco84x]

PENDING

New year, new project. I sometimes think I enjoy building more than driving them when I'm done.

Good rust free frame and birdcage.
Daytona Sunset Orange metallic (C6 color)
Van Steel Offset rear and tubular front arms.
SA Van Steel (QA1) shocks
13 in Wilwood front and rear 6piston/4piston
18x10 Rocket attacks with 285/35 nankangs
383 stroked in original block
Kevko RR oil pan
Performer RPM heads..and intake
Comp cams XR282 roller cam
ARH Stainless headers
custom 3 inch stainless exhaust with matched X-pipe to engine--not off the shelf- Oval pipe used for clearance where neededs
Borla XR-1s
MSD dist and 6AL
Holley Sniper for fuel and spark control
Tanks Inc with built in Walbro
Tremec TKO-500
Centerforce clutch
3.36 rear diff
NEW Hydroboost
BeCool radiator and fans (new replacement BeCool radiator will be installed prior to sale)
Vintage Air
New AC Compressor
New Alternator
Recaros
Sony Bluetooth head unit with Morel Speakers and powered Blaupunkt Sub
Autometer GPS speedo and tach
new dash pad and door panels
Dynamat
electric wiper conversion
vacuum headlights operate perfectly
Custom front spoiler(not really that big a deal)
Excellent paint Not 100% perfect as a show car but very very nice.
Clean driver undercarriage.

It was built with the intention of being a very fast track to that could reliably and comfortably be driven to and from the track...Well, as comfortable as a 50+ year old Corvette can be. Fast forward to today.. I'll probably never track it again. It's fun, fast and reliable. Turns very well. Stops hard. Pulls 6500 easily. Gets lots of attention everywhere.

I'd like to get around $59,000 for it. (it is posted other places at $65k. I would consider partial trades for something interesting...No bikes, jet ski's or boats(except a Floyd Skiff 8 wt) I also need a stock truck 5.3/6.0 type engine and Automatic trans for the next project. Would consider partial trade Located in Central Florida.