'70 Maverick

[TerryH432]

Finally finishing up the strut tower brace project I started a good while back. These cars had factory supports from the firewall to the towers. Those were deleted when the car was built. The towers are notched. Guess they thought that was good enough. The guys at RRS suspension were pretty adamant that the car needed bracing so I fabbed up supports from the firewall to the towers and across the towers. Thankfully enough room to fit the swedged rods between the Sniper and the distributor. The swedged rods, heim joints, spacers and nuts for the rods from Speedway. Couple chunks of 1/4" 6061 off Amazon and a bunch of stainless bolts and such from my local bolt and screw supply.